Yamaha controller

[redlinj]

I need a control for the 2020 Yamaha F115 I just purchased. Can anyone tell me the difference between a 703-48205 and 703-48207. Only difference I might be seeing is that the 48207 has another pigtail of wires coming out from it to maybe connect to a digital speedometer, while the other pigtail may go to the tach and possible to the tnt. Main harness of course, going to the engine! Can anyone clarify? Thanks!

 

[boscoe99]

The 703-48205 has long since been discontinued. Replaced by the 703-48207 control box.

Latest box has three wires for connection to a remote trim and tilt switch, four wires for connection to the tachometer, speedometer and fuel meter and a ten pin harness that connects to the motor.

 

[redlinj]

The 703-48205 has long since been discontinued. Replaced by the 703-48207 control box.

Latest box has three wires for connection to a remote trim and tilt switch, four wires for connection to the tachometer, speedometer and fuel meter and a ten pin harness that connects to the motor.

Thanks Boscoe! Just had not been able to find much info on the 48207! I always see another couple of numbers after the 48207,?like 16, 20, etc. Thinking they would indicate the length of the 10 pin harness! Thanks again!

 

[boscoe99]

703-48207 is the base number. The first pair of dash numbers indicate a variant. Design change. Upgrade if you will. Latest is the -25-00.

 

[boscoe99]

There is a newer version of the 703 control box that includes a "press to shift" button. For those that feel the need for it.