Thanks Boscoe! Just had not been able to find much info on the 48207! I always see another couple of numbers after the 48207,?like 16, 20, etc. Thinking they would indicate the length of the 10 pin harness! Thanks again!
Would all the 703-48207 controllers have the necessary 7 wires for the tach and speedometer! Looking at pics, it’s hard to tell for sure.
After doing further research, I found that I needed two additional harness’ to hookup the gauges! I’m almost there now, but still need a bit of clarification! There are two separate pigtails coming from the controller, each with a red, blue, and green! These merge, with red to red, blue to blue, and green to green ending in 3 female bullet connectors! These wires appear to me to be for power and the tnt! If this is correct, here lies my confusion; looking at the 10 pin diagram for the engine harness, does the harness not already include tnt, with the switch on the controller handle? Can you clarify this for me! Am I close or way off base? Thanks!
