what is it with spark plug $$$$

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,436
so what is going on with spark plug$$ some kits go for 35$/8pack

l 78v permagaps 16$ cdn each ???
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,813
Supply and demand ??----When you are hot and thirsty you will pay $3.00 for 1 liter of water.-----At that price Canada should start selling the water in the 5 GREAT LAKES to the world.
 

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,638
I buy QL77JC4 in bulk and save a little dough but not much. The latest place I purchased from had just picked up 14,000 from Wall Mart.

Apparently Wall Mart doesn't want to be in the outboard part business!šŸ˜†
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,436
ETECs... can't say if I changed them once maybe twice in 18 years and not because I had problems just because I fugured they should not have lasted so long :) ... i'll lok them up just to get ready for the big shock thankfully I have a I3 .
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
27,837
You need to look around, as some places do charge a lot. The Mazda brand iridium plugs for my car were $24/ea. I found some for about 1/4 of that price.

You can check places like autozone, rockauto and advanced auto parts. The latter had QL78YC plugs for my Johnnyrude for $3ea, last year.
 

909

Chief Petty Officer
Joined
Jul 19, 2021
Messages
537
Autoparts stores will sometimes stock them cheaper than my local dealer.
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,066
Found my QL77JC4 plugs at the local Ace hardware for $3.99 marketed under their the 828M nomenclature.
 

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,638
ETECs... can't say if I changed them once maybe twice in 18 years and not because I had problems just because I fugured they should not have lasted so long :) ... i'll lok them up just to get ready for the big shock thankfully I have a I3 .
To maintain my original 5 year warranty I went ahead and replaced them at 300 hrs and just used the benchmark the whole time I used it.

Certainly was not needed.
 

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,080
Wait until you buy them for your hi tech electronic controlled engine in your car !! Neighbor had a tuneup on his hemi....plugs, wires, etc....over 300 bucks in plugs and wires ...no labor !!
 

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,638
Wait until you buy them for your hi tech electronic controlled engine in your car !! Neighbor had a tuneup on his hemi....plugs, wires, etc....over 300 bucks in plugs and wires ...no labor !!
Plug wires for a Porsche in the late 80's were close to $400 buckaroonies!
 

Nordin

Commander
Joined
Jun 12, 2010
Messages
2,555
The only good with these surface gap plugs are you do not need to change them very often. They last for a very long time.
Just pull them clean them up and put them back.
Doen not matter of brand, NGK, Champion, Bosch or other.
This is my experience of them.
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
27,837
Actually, the only time I change the spark plugs on my outboards is when the shells get rusty and threaten to stain the powerhead.
 

Lou C

Supreme Mariner
Joined
Nov 10, 2002
Messages
12,648
IIRC the AC Delco 43s for my old 4.3 are like $3 each. I never seem to wear em out, I have a couple of sets that I clean and rotate in use.
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,813
I recall working on some small OMC outboards where plug gap had worn from 0.030" to 0.070"-------Means that motor / plugs were working fine up to that point.-----Many good sparkplugs are thrown out I think.
 
Top