Re: Wellcraft Excel 1992 18sx
Correct. To the best of my knowledge. I just used feeler gauges, sometimes 4 or 5 on top of each other to measure the gap to make sure the variance is no more than 2 mm, of course no variance is probably the best.
Have a great day
Rob.
oh.....
i was misunderstanding as you said before that you used feeler gauges which are very thin...so i thought you had to get the shield 2m away from the fly wheel housing.
so the 2 mm or 1/16 of an inch is not the distance between the shield and fly wheel housing... its the allowed variance between the 3 tabs distance between the shield and transom?
Correct. To the best of my knowledge. I just used feeler gauges, sometimes 4 or 5 on top of each other to measure the gap to make sure the variance is no more than 2 mm, of course no variance is probably the best.
Have a great day
Rob.