I did manage to get some work done over the weekend.
- Tank installed
- most of the sole down I have the bow left and a couple of small strips in the back. yes its dirty i need to clean it up.
It's really nice to have a solid surface to walk on again and boy is the boat stiff now. I decided to save my epoxy for the glass and used pl to adhere to the stringers and hull. No screws just loaded the floor with all my dumb bells. I knew I would need them for something... It did swell but I should be able to lightly sand a radius in it for the glass work.
Just because nothing is straight I found center and marked lengths every 3". That seemed to give me plenty of precision but every 6" would probably have worked just as good.
Also, I need help identifying the tank sending unit. I didn't see a part number anywhere unless its underneath and rusted beyond seeing it. any ideas?
Also, still on the fence with cutting the locker but I hate to lose the storage space so probably need to find a hatch.