A couple of things….. 1st, I bought this boat used, seems in great condition, a 2007 bayliner discovery. One issue is it has water coming into the engine area, I cannot see it or find it- it is a lagging issue. The first 30 minutes on the water it is dry, as time goes on it’s starts taking on water. I can find it. The bellows all look good from the outside. I did change the gimbal bearing when I bought it. And also the starter, boat shop repair. Is it possible they changed the angle of the motor?
2nd It will not plane out without porpoising. It runs well around 3k rpm, the speedo was plugged ( recently hoped I unplugged it).
could the rpms gauge be wrong? Tried several different props. Had a 23 pitch when I bought it( was chewed up) people recommended a 21” prop, tried both a 3 and 4 blade . Still will not plane above 3k rpms.
any advice nay be helpful ! Thank you!
2nd It will not plane out without porpoising. It runs well around 3k rpm, the speedo was plugged ( recently hoped I unplugged it).
could the rpms gauge be wrong? Tried several different props. Had a 23 pitch when I bought it( was chewed up) people recommended a 21” prop, tried both a 3 and 4 blade . Still will not plane above 3k rpms.
any advice nay be helpful ! Thank you!