Trim Cylinder line O-ring/cups

[Andrew W]

Is there a trick to removing the brass cup to replace the o-ring where the line connects to the trim cylinder? Mine is leaking ever so slightly.

 

[Fun Times]

See if item numbers 14 - 17 may help with a visual,

Trim System Kit, Second Design

Make sure to keep your Volvo Penta Genuine!

www.volvopenta.com

 

[Andrew W]

See if item numbers 14 - 17 may help with a visual,

Trim System Kit, Second Design

Make sure to keep your Volvo Penta Genuine!

www.volvopenta.com

Thanks - it’s part 14 that needs to come out to replace the o-ring. Volvo and after market sells kits for these, but it looks like it needs to be drilled/ground out. Just trying to do my homework before attempting on a very expensive trim cylinder.

 

[Fun Times]

Thanks - it’s part 14 that needs to come out to replace the o-ring. Volvo and after market sells kits for these, but it looks like it needs to be drilled/ground out. Just trying to do my homework before attempting on a very expensive trim cylinder.

Looks like a drill out may be needed.

DPS-A Trim Cylinder Rebuild

Since I had a leak in one of the cylinders, I decided to rebuild them both...just as well, both had milky water in them. Bill was very helpfull, even sent me a replacement rod seal after I damaged one. Volvo SX - A DPS - A Trim Cylinder Ram Rebuild Kit...

forums.iboats.com