Im very frustrated with my boat! Before the first trip this season i emptied the tank on my boat. Put fresh gas in it, 50 gallons to be exact, also put a gallon of oil, a bottle of seafoam and a bottle of stabil. Ran it on the lake for a while and everything was good. On the next fill-up i put 30 more gallons of gas and another bottle of stabil. Took to to the ramp put it in the water, started it up and idled fine for like 10 minutes. Went out through the channel and when i gave it throtle the engine died. Check the glass inline filter and it was all murky and white. I thought i had water in the water separator so i emptied it and pumped new gas through it. Same murky whitish gas was coming out. Repeated the process of empting out the water separator and pumped gas through it again. This time it was good gas. Clean, clear and blueish. It ran perfect the rest of the day. No problems at all!! Last night took the boat out to the ramp again for a little night fun around Downtown Miami. Same thing, put the boat in the water, idled for like 10 min, and when i went to give throtle, the engine died on me again. Checked and there the murky fuel was again. This time i pumped and pumped and no clean fuel ever came out. What can this be?? Too much stabil? If its water, i can't imagine how that much water got in there!!!!