timing issue 5.7 omc with electronic ignition

wanderlust

Cadet
Joined
Jun 30, 2011
Messages
10
recently picked up a 88 245 vista cruiser.started right up then i get her back to colorado and got to do the timing dwell and such thats when i dicovered its a electronic ignition so go to set timing after i get the cap back on now she wont fire up.....any ideas?
 

91rr

Seaman
Joined
Apr 21, 2011
Messages
55
Re: timing issue 5.7 omc with electronic ignition

What type of ignition is it? Where in CO are you? If you are near Lakewood I'ld be more than happy to give you a hand.
 

wanderlust

Cadet
Joined
Jun 30, 2011
Messages
10
Re: timing issue 5.7 omc with electronic ignition

not quite sure of what type but im in grand junction
 

91rr

Seaman
Joined
Apr 21, 2011
Messages
55
Re: timing issue 5.7 omc with electronic ignition

Too bad. If it has been replaced with a Delco EST then you would need to follow these instructions.
http://forums.iboats.com/showthread.php?t=271407

You can always set it by feel to get it close. Just have some one crank the engine and slowly rotate the dist until it fires and then just slowly play with it until you get a smooth idle. It will get you in the ball park at least.
 
Last edited:

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: timing issue 5.7 omc with electronic ignition

Post some pictures of your distributor. You would be surprised what people have installed in old engines.
 
Top