Tilt trim making weird noise.

[zakhewlett2006]

Okay so I just put a new trim motor on my 2006 evenrude 70hp 4 stroke etech, and the tilt trim makes like a noise when all the way at the top or all the way at the bottom, when I push it all the way down with my foot it then it work until I try to out it all the way up, I’ve attatched a video. Any help would be appreciated

 

[saltchuckmatt]

4 stroke etech?

It's E-tec.... and it's the finest 2 stroke outboard ever made.

Your download wouldn't play well when I download the video but common thing on that motor is if the big clamp nut isn't torque correctly you get that nasty sound.

Check the big nut on the end of your tilt tube and over torque a little if need be.

 

[zakhewlett2006]

Thanks for the reply, I thought e tech meant fuel injection my bad it is a 4 stroke, I’ll give it a look thanks

4 stroke etech?

It's E-tec.... and it's the finest 2 stroke outboard ever made.

Your download wouldn't play well when I download the video but common thing on that motor is if the big clamp nut isn't torque correctly you get that nasty sound.

Check the big nut on the end of your tilt tube and over torque a little if need be.

 

[Chris1956]

Grease the tilt tube.

 

[saltchuckmatt]

The E-tec is a fuel injected motor. 2 stroke, rotax designed engine.

 

[Crosbyman]

rotax ?

Evinrude E-TEC Family of Outboard Motors Review

Bombardier Recreational Products has reinvented the outboard. Its E-TEC family of Evinrude motors are available in a broad array of horsepower ratings

www.marineenginedigest.com

 

[saltchuckmatt]

When BRP took over OMC they cleaned up their tolerances and shifted many of their rotax designs to the E-tec....or so I was told when I purchased my first one in 2011.

Either way it's not a 4 stroke as the poster is saying.

 

[zakhewlett2006]

Grease the tilt tube.

Did, same problem

 

[zakhewlett2006]

When BRP took over OMC they cleaned up their tolerances and shifted many of their rotax designs to the E-tec....or so I was told when I purchased my first one in 2011.

Either way it's not a 4 stroke as the poster is saying.

It is a 4 stroke though,,, just not an etec

 

[Crosbyman]

if it has a OIL PAN... it is 4 stroke

BJ70PL4SDM 70 hp​

post your engine model # !! post a picture sure looks like the 70hp was a 4 stroke.