Skeeter owners

lcnevarez

Recruit
Joined
Mar 9, 2012
Messages
1
Re: Skeeter owners

Hi All
LC here, just bought a 1984 Skeeter SF175 w/ a 1986 Mercury 150HP Black Max SR4. I was told that the lower unit has no spark, possibly the power pack, the shaft possibly bent. The hull looks good boat looks great for what I paid for it.

I don't have any idea where to start to rebuild, would appreciate some advice. Will be joining a bass club to meet fellow anglers and find some dependable mechanic. Thanks All.
 

bdchristian

Recruit
Joined
Jan 26, 2011
Messages
1
Re: Skeeter owner needs help

Re: Skeeter owner needs help

Hello everyone I just found and joined this forum. I bought an 1987 Skeeter F-80 Strada with a evinrude 88HP SPL. Although I have been fishing with it. It needs some work and I am preparing for the winter layup. I guess much has changed with the multi users since 1987. I have one of the liver well pumps out and when i replace it i will replace both lives and bilge pump. Also I need to rewire the boat it is like a birds nest in the hole. My fuse box has been completely by passed and not used. The reason for all this description is that i am looking for a possible wiring diagram for the boat hoping someone may have a manual or could aleast direct me in the correct direcction.

thank you
Byron
 

tysdad2010

Petty Officer 3rd Class
Joined
Apr 2, 2012
Messages
88
Re: Skeeter owners

1995 150ZX with 150 Mariner EFI...Running 57-58MPH WOT 5900RPM with just me in it....55-56MPH with me and another adult...3 blade SS prop..23 Pitch...No jackplate

Soon to be adding a Humminbird 998C Si,Jackplate and Hydraulic Steering

Fall2012123.jpg


Fall2012122.jpg


Fall2012121.jpg
 

ADGator76

Cadet
Joined
Feb 1, 2013
Messages
19
Re: Skeeter owners

New to the forum. My Skeeter is a 2000 ZX202 with a VMax 225 and 80lb Motor Guide Tour on the front.
 

goffball56

Cadet
Joined
May 19, 2012
Messages
19
Re: Skeeter owners

Hey guys! I have 1990 Skeeter SF150 sx and I can't keep It from porpoising at full throttle. Equipped with 1986 yamaha pro v150 that run perfect. I've tried moving jack plate up and down which is a 6" by the way and I just don't get it. It did the same when I had merc 150 on it before. Any suggestions on what may be causing my problem? Thanks Justin
 

bassman1957

Recruit
Joined
Apr 30, 2013
Messages
1
Re: Skeeter owners

I have a Skeeter SX190 and the grab rail on the port side is loose it appears like the rubber gaskets are deteriorating under it, I can get to the back nut on the bar by removing the port side rear storage box and reaching under the cap but I don't see any way to get to the front nut on the bar. If anyone could enlighten me on this one I would appreciate it. Thanks
 

Attachments

  • 02 skeeter 018.jpg
    02 skeeter 018.jpg
    153.6 KB · Views: 1

Johntvette

Recruit
Joined
Aug 15, 2018
Messages
2
1996 Skeeter 200SL w/1996 Evinrude Vindicator 200.
Garmin Echomap Plus 74sv on the console (barely fits) and a Humminbird Helix 5 Chirp on the bow.

65.8 MPH with 2 people (400lbs) full fuel, livewells full, fishing gear and a full ice chest.
 

Attachments

  • photo298855.jpg
    photo298855.jpg
    813.1 KB · Views: 1
Top