replacing disc brakes

[fishnbowler]

93 Ranger Trail, changing disc brakes hubs rotors. Problem: kit comes with inside bearing 1.38 and outer 1.16. Spindle is 1.38 front to back. size does not stair step ???
Can the spindle be changed on this model or...

 

[dockwrecker]

Re: replacing disc brakes

That's the standard stuff and dimensions for the kit you're looking at typical to a #3500 lb axle. Might want to call or email championtrailers.com and see if there's something built for a straight spindle. I've never seen a straight spindle built for brakes at 1-3/8.

 

[fibersport]

Re: replacing disc brakes

Never seen replaceable spindles, at least easily changed. You're looking at a new axle to change spindle size. Is there a chance the axle was changed at some point? Dumb question but did you check both sides on the off chance a PO added a spacer or something?

 

[fishnbowler]

Re: replacing disc brakes

Thanks. Sad part is I have already purchased the brake kit. I need to find out if the spindle can be changed on this trailer, or if there is such a bearing size of ID 1 3/16, and OD of only 1 13/16. Everything is great except that one bearing, or the spindle size.

 

[dockwrecker]

Re: replacing disc brakes

You're better off to change the axle complete. They can be had for the price of spindles alone and can be changed out in about 1/2 hour with basic tools.

 

[fishnbowler]

Re: replacing disc brakes

I have a Ranger Trail boat trailer. I have a straight spindle. 1 3/8 front to back. not stepped sizes. Bought new Kodiak kit w/ hub/rotor, calipers etc. outer bearing ID is too small. Wrong brake kit? Took off disc brake assembly (rusted). What kit do I need? Thanks.