Removing regret

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
Few picks of what is under the ratted shroud.
 

Attachments

  • IMG_0574.JPG
    IMG_0574.JPG
    69.3 KB · Views: 13
  • IMG_0745.jpg
    IMG_0745.jpg
    70.4 KB · Views: 13
  • IMG_0575.JPG
    IMG_0575.JPG
    66.6 KB · Views: 13

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
Sorting thru the coffee cans for all the nuts and bolts to rig the cable steering, have to fit the seat backs before I run the cables.
 

Attachments

  • IMG_2802.jpg
    IMG_2802.jpg
    90.7 KB · Views: 6

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
Spent some time washing the boat down, ready to go in for some work. Have to admit it is going to be hard to let it go, might have to keep it for a summer or two.
 

Attachments

  • IMG_2803.jpg
    IMG_2803.jpg
    170.4 KB · Views: 22
  • IMG_2804.jpg
    IMG_2804.jpg
    167.1 KB · Views: 22

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
Son was over to pick up his dog yesterday and he helped me get the motor off the boat and get the boat off the trailer and on dollys. Fits in the garage better and I can install the steering and seats without climbing up a ladder to get in the boat.
 

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
I put the seat cushions and seat backs in to figure out cable paths for steering and mounting the controls.
 

Attachments

  • IMG_2812.jpg
    IMG_2812.jpg
    120.8 KB · Views: 7
  • IMG_2813.jpg
    IMG_2813.jpg
    129 KB · Views: 7

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
I started by putting in just the front pulleys from the drum last night, not much done but I did a little more fine cleaning. I have the day to myself to do what ever I want and figured I would work a little more on the boat. I went out and looked at the boat and it dawned on me, I could finish the restoration drive it a few times and sell it end of restoring boats.

14' bullet proof aluminum run about low cost, what was I thinking, this is a perfect boat to hand down to my grandson's I can put a 35 hp 4 stroke on the back and the boys will have their own boat to learn on and enjoy.
 

DeepCMark58A

Commander
Joined
Aug 17, 2015
Messages
2,349
Upon further review and looking at HP restrictions for young boat operators in Minnesota I will not be putting a modern 4 stroke on the back. I will put the old mercury on the back, no CO officer will know what HP that old smoker is.
 
Top