Rehab SportCraft 222 1983 deep V hull cuddy walkaround

[kcassells]

Hey now,,, Not much to report. Grinded down all the nubs from making the filets on the starboard side hull. Yea that's right..I said it, I need to use the correct lingo.
Gonna clean up and do some glass tom. or the weekend.







Just remember...the grinding really never ends. Keep the work as clean as you can to reduce the grinding. Funny so you have 15-20 minute pot life so all your wires are poping saying...got to get it in before it trips. So drips happen.
Happy Boat Fixin says I!
Acetone it out after a good vacuum yob.

 

[kcassells]

Goofy day...Got some tabbing done. Went with 3" and then 6" tab. Cut out the glass for the next stringer.

 

[Woodonglass]

Any progress is Great Progress!!!:sad:

 

[sphelps]

Whoops....I meant Sam!!

I do have a brother named Mike ... you can call me anything ya want but late to dinner !

 

[kcassells]

So dinner anytime you're around Delco, Pa and yes every leetle bit counts. Did another wet on wet for the stringer. I wished I had done it on the flat but I was anxious to get it in. Had enough resin to do another single pc. of stringer biut no pic of that.
Need to make another run to US Comp;

Letting the glass breath;



Wetting out stringer then the glass;


Wetted out and working # 2;

 

[kcassells]

Getting there slowly but surely!

 

[kcassells]

Hey Everyone.............
Happy 4th of July! to everyone!

 

[Tnstratofam]

Happy 4tth to you all too!

 

[sphelps]

Happy Independence Day KC !! :usa2:

 

[mickyryan]

happy 4th man i did some glass work this morning myself just not anywhere close to as much as you are doing:0

 

[kcassells]

happy 4th man i did some glass work this morning myself just not anywhere close to as much as you are doing:0

Good to see ya Mick! Whats ya glassin? Wheres the pics? You holding back on another rehab..:happy:

 

[mickyryan]

just floor of bass boat nothing major this is going to be my beater boat for crabbing trot lining and fishing , didn't wanna destroy monishka with crabpots lol

 

[kcassells]

Got ya! Crab time here too! This weekend me thinks I'll crack a few. Went back into the cave today...man sweated my ...off. Got tired real fast of catching drops in my glasses and spotting the wet glass. Add a 6 and 9" tab on the foremost starboard stringer. Next will be to tabs all the corners. Then onto the PORT side. Not much to see, tough spot.

 

[kcassells]

Boy this boats a mess. Clean out time this weekend!

 

[ahmincha]

Happy forth KFC great work as usual

 

[kcassells]

Hi Minch, Always a pleasure to see you swing by.
So today was not real exciting but necessary. I cleaned out the boat. Tired of the dust, glue, scraps and glass bits laying around. Actually was a good day for it cause it was raining most the morning. Also got to see where the new leaks come in from the cover. So prob. reset the cover this weekend also.
Very nice thogh to see some old glass work that was sitting under me ply/seat/shelf area around where the chairs will go.

 

[kcassells]

A leetle beta;

 

[kcassells]

I haven't been able to order supplies yet but there is always something to do ya know. So after I pressured wash the boat out yesterday and let dry out I decided to cut my stringers and bulkheads down to new deck level. Was kinda fun...I am by no-means a carpenter and a sawzall is my tool of choice...

 

[kcassells]

So some more p ics...Now that I'm using my camera at a lower kb. Pics want to simply duplicate for no reason. Plus photo bucket is now history.
So then I wipred down all the stringer tops and filled the voids. Letting that dry out, will sand and then roll out/coat with EEEEEPPPPOOOOXXXY!

 

[kcassells]

Still need to put in another stringer and all the bulkheads as well as finishing the tabbing. Sorry about the duped pics. Tired of spending too much time cleaning it up. Good enought says I!