Post a pic of your starcraft!

backintheday

Cadet
Joined
Oct 24, 2020
Messages
9
Well i started a boat project and have been looking around for information and ended up here . I got a 1983 starcraft 15.8 supersport with a 50hp evinrude .
 

Attachments

  • IMG-20201010-WA0006.jpeg
    IMG-20201010-WA0006.jpeg
    1.3 MB · Views: 39
  • 20201024_075816.jpg
    20201024_075816.jpg
    2.2 MB · Views: 39

Watermann

Starmada Splash of the Year 2014
Joined
Jan 12, 2013
Messages
13,747
Well i started a boat project and have been looking around for information and ended up here . I got a 1983 starcraft 15.8 supersport with a 50hp evinrude .
Nice, good on you for taking up the challenge of getting one of these old boats back on the waves again.(y)
 

backintheday

Cadet
Joined
Oct 24, 2020
Messages
9
I do have alot of questions one is im replacing the floors and i dont like the idea of rivets i was thinking of riveting aluminum around the boat then using rivet nuts for the floor do you of anyone that has done it and the outcome?
 

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
24,829
I do have alot of questions one is im replacing the floors and i dont like the idea of rivets i was thinking of riveting aluminum around the boat then using rivet nuts for the floor do you of anyone that has done it and the outcome?
Start a topic about your rebuild, this isnt a rebuild discussion topic and ask about rivet nuts and any/all aspects of rebuilding your SC there.
 
Joined
Nov 27, 2020
Messages
10
1986 Starcraft 191 4-cylinder 120 homeported in Frankfort Michigan on beautiful Lake Michigan!
 

Attachments

  • Screenshot_20201115-194143_One UI Home.jpg
    Screenshot_20201115-194143_One UI Home.jpg
    1.5 MB · Views: 14

Nottalottayott

Recruit
Joined
Dec 3, 2020
Messages
2
The floor is rotten,got the motor to purr like a kitten, outdrive has fwd and rev, the hydraulics leak.I bypassed the impeller and got a little water in the oil . I think the plate in the silly intake exhaust heater changer may be history and leaks.
 

Attachments

  • 20200724_090955.jpg
    20200724_090955.jpg
    3.5 MB · Views: 34
  • 20200724_091035.jpg
    20200724_091035.jpg
    1.4 MB · Views: 34
Last edited by a moderator:

strov68

Seaman Apprentice
Joined
May 19, 2011
Messages
45
Just got her home last night. 22ft V5 "Mariner", although plate identifies it as a super sport. Title says 1980, but seems like it might be a 78 from the HIN ending in 78. I will start a rebuild thread when I get a chance since it is allegedly winter here in Michigan. 
PXL_20201209_212923542.jpgPXL_20201209_213432881.jpgPXL_20201209_213501390.jpg
 

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
24,829
My guess is that it WAS a SuperSport and was "converted"

Doesnt look like the factory decking painted white. Does the title list the correct HIN ending in 1978?

Run the HIN here
Www.HimDecoder.com
 

strov68

Seaman Apprentice
Joined
May 19, 2011
Messages
45
My guess is that it WAS a SuperSport and was "converted"

Doesnt look like the factory decking painted white. Does the title list the correct HIN ending in 1978?

Run the HIN here
Www.HimDecoder.com
Yes, title has matching HIN. It very well my be a conversion because I have only been able to find one other like it on the internet. It was posted here about 4 years ago by rowdy85.

 

jerrod09

Recruit
Joined
Nov 16, 2020
Messages
1
I picked up a 72 starcraft kingfisher 14' for $150 with no trailer intending to make a boat out of it. Then, I found a 74' starcraft SS 16' with trailer and a running 70hp Johnson with great compression. It was an abandoned project where they were going to turn it into a center console. To my delight, the seller kept all of the windshield and open bow stuff. So, I'm in the process of completely stripping it down and restoring. I have everything off and going to strip all the paint, go bare aluminum, and customize it to my liking. I'll do the kingfisher along side so hopefully in the end I'll have two boats that will last another 50yrs. I def. caught the aluminum boat bug.

I have been absorbing all the great info in the forums.
 

Attachments

  • 20201203_164212 (Medium).jpg
    20201203_164212 (Medium).jpg
    347.2 KB · Views: 23
  • 20201203_170059 (Medium).jpg
    20201203_170059 (Medium).jpg
    379 KB · Views: 23
  • 20201217_174039 (Medium).jpg
    20201217_174039 (Medium).jpg
    349.2 KB · Views: 23

Watermann

Starmada Splash of the Year 2014
Joined
Jan 12, 2013
Messages
13,747
I picked up a 72 starcraft kingfisher 14' for $150 with no trailer intending to make a boat out of it. Then, I found a 74' starcraft SS 16' with trailer and a running 70hp Johnson with great compression. It was an abandoned project where they were going to turn it into a center console. To my delight, the seller kept all of the windshield and open bow stuff. So, I'm in the process of completely stripping it down and restoring. I have everything off and going to strip all the paint, go bare aluminum, and customize it to my liking. I'll do the kingfisher along side so hopefully in the end I'll have two boats that will last another 50yrs. I def. caught the aluminum boat bug.

I have been absorbing all the great info in the forums.
Nothing like jumping right into 30 feet of tin needing love and affection! (y) 😂
 
Top