PL Poly

[mytquinn]

Newb here,

Could someone clue me in to which PL product that everyone seems to be using here? I'm wanting to use it to bed my stringers, but when I went to Lowes, I wasn't sure which product to buy.

Thanks.

 

[jonesg]

Re: PL Poly

PL premium construction adhesive.

 

[mytquinn]

Re: PL Poly

Thanks Jonesg,

I was hoping that was the one, because they carry it in the big tubes.

 

[MTribe08]

Re: PL Poly

I used PL 375 or 400...The heavy duty stuff was almost twice as much. The stuff I bought was strong as heck..I glued some bulkheads together..I would have ripped the wood apart before the glue let go.

 

[osborn159]

Re: PL Poly

i was a bit skeptical about using this stuff, i took 2 pieces of 1/2in ply and glued them together let cure 24hrs took a 3ft pry bar wedged in the joint and split the plywood on its mfg glue the pl stuck like a champ, so it sold me there and that is why im using it to bed transom, stringers and deck down, i will use minimal screws in the deck now.
D

 

[osborn159]

Re: PL Poly

btw i too am using the 28oz tube, it didnt make sense to pay 4.99 for a 10oz, when the 28oz was 6.99 guess its all in the packaging

 

[jonesg]

Re: PL Poly

I used PL 375 or 400...The heavy duty stuff was almost twice as much. The stuff I bought was strong as heck..I glued some bulkheads together..I would have ripped the wood apart before the glue let go.

I've tried those , both were very good.