Tommytornado
Recruit
- Joined
- Jun 21, 2021
- Messages
- 3
Thanks very much for your help. As soon as warm weather gets here again I will try that.Fiberglass boat has a gelcoat finish, not paint, unless original owner painted it....
You could start w wax and see how it goes, but may need to be cut first w progressively finer grits of wet sand paper. Start w least aggressive you think might work and go more aggressive until you see a result then work back down thru finer grits.
Thanks very much for your help. I will try this.elbow grease
generally boats are gel coat
the surface gets oxidized.
the cure is wet sand, then polish