oil intake adjustment

[onebassdoug]

Had my 1976 115hp evinrude rebuilt a while ago. Person said they set it fat so it wouldn't lean out again. I believe he set it too fat, how do I readjust it to factory specs

 

[racerone]

Explain why you mention----" oil intake adjustment " on this motor ?-----You would have to replace the carburetor jets.----Fairly easy to do.----Your location ?

 

[flyingscott]

Had my 1976 115hp evinrude rebuilt a while ago. Person said they set it fat so it wouldn't lean out again. I believe he set it too fat, how do I readjust it to factory specs

Are you sure he did not just ask extra oil in the fuel? Not uncommon to do in a rebuilt motor. Once that is used up you mix the new fuel at 50-1.

 

[onebassdoug]

Explain why you mention----" oil intake adjustment " on this motor ?-----You would have to replace the carburetor jets.----Fairly easy to do.----Your location ?

pa,

 

[onebassdoug]

pa,

 

[onebassdoug]

Are you sure he did not just ask extra oil in the fuel? Not uncommon to do in a rebuilt motor. Once that is used up you mix the new fuel at 50-1.

yes he said he fattened it a little,

 

[onebassdoug]

yes he said he fattened it some,injectionn not mixed

 

[racerone]

???----There is no ----Injection system ----on a 1976 2 stroke model -----Need a model # of this motor !-----Gas and oil are mixed at 50:1 on this engine.

 

[onebassdoug]

???----There is no ----Injection system ----on a 1976 2 stroke model -----Need a model # of this motor !-----Gas and oil are mixed at 50:1 on this engine.

sorry,it's mixedd automaticly from oil reservoir

 

[racerone]

That was never installed at the factory.----Retrofitted by a previous owner.

 

[flyingscott]

Why don't you put up a pic of this motor or the model #