needle valve in the float bowl is clogged

dlrfish

Recruit
Joined
May 3, 2011
Messages
3
I have a 1993 yamaha out board 250 horse power with 6 carburators . The passage way from the fuel inlet to the needle valve in the float bowl is clogged. They have been soaking in carb. Solvent for days and have been blown with compressed air to no avail. It doesn?t seem to be a varnish {old gas turns it} issue. How to clean this passage is the real question?
 

SparkieBoat

Captain
Joined
Aug 17, 2009
Messages
3,643
Re: needle valve in the float bowl is clogged

use a small piece of wire..I have never seen a clog that stubborn before.
 
Top