weekender1
Petty Officer 3rd Class
- Joined
- Apr 12, 2011
- Messages
- 99
Hi all well it has been a while since i have posted but need a question answered if i could please on my engines wiring harness there is a white wire going from the coil to smoe place els and in the book it says it is a resistance wire? when the motor is running the wire gets hot is this wire needed and also what is the wire for?..
also question 2 after making a new motor mount for the boat and setting the motor in when i do the allinment test with grease the top and bottom splin marks are good but for some reason the is more on the left side than the right side? i was told that when the engine mounts on the transom where bolted in place the engine would be straight and only have to adjust up or down? please let me know if there is something else that might need to be done.. Thanks.
(Do not judge a boat just do the fact it floats,Judge me for my speed.)
also question 2 after making a new motor mount for the boat and setting the motor in when i do the allinment test with grease the top and bottom splin marks are good but for some reason the is more on the left side than the right side? i was told that when the engine mounts on the transom where bolted in place the engine would be straight and only have to adjust up or down? please let me know if there is something else that might need to be done.. Thanks.
(Do not judge a boat just do the fact it floats,Judge me for my speed.)