Live well drain access tracker 16

Status
Not open for further replies.

sandman64

Recruit
Joined
Apr 4, 2022
Messages
2
I am new here and I have a 2018 tracker pro guide v 16.
The fitting on the hull where the live well drains is loose. By that, I mean, under the boat hull near the bow, I can grab that fitting and it slides easily back and forth. So, I am taking on a lot of water.
My question is this, Does anyone know how to get to the back of this so i can tighten it or replace the seal or whatever needs to be done? i can't find any access to it.
Thank you in advance.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
46,352
welcome aboard.

start taking the boat apart above it. plan a complete weekend

while at it, if the thru-hull is plastic, replace it. they last about 5 years max
 

sandman64

Recruit
Joined
Apr 4, 2022
Messages
2
welcome aboard.

start taking the boat apart above it. plan a complete weekend

while at it, if the thru-hull is plastic, replace it. they last about 5 years max
Thanks for the input.
I started doing that. But it looks like taking off a TON of parts just to get to the floorboard as it's tucked under the sides. And finding the screws in that carpet is a pain.
I'll take a look when I get home.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
46,352
Yes, lots of work, and lots of parts to remove
 

Canadamike

Cadet
Joined
Aug 29, 2022
Messages
14
Have the exact same boat but a few years older. Curious on how you made out with this and if you have any pictures of the disassembly
 
Status
Not open for further replies.
Top