Help with transom.

[zool]

I have a multi tool. Maybe my choice of blades is incorrect. Any suggestions?

I use the rounded japanese saw attachment to cut and the flat blade to separate wood from hull skin.

 

[todhunter]

What tool is used on this planet to get the good wood and glass out of the bottom of the transom.[

Start reading from here.
-Multi-tool to cut the skin around the perimeter. I like the squared-off cheap blades from Amazon.
-Chisels, screwdrivers, and pry bars to peel off the inner fiberglass skin.
-Circular saw to cut most of the way through the transom wood and make smaller chunks that are easier to knock out.
-Chisels, screwdrivers, and pry bars to peel off the old plywood.
-Belt sander to get remnants of wood off of the outer fiberglass skin.

 

[Grub54891]

These work great for finishing off. The hard version called Spira cut grind really well to get the rough knocked down.

 

[Scott Danforth]

What tool is used on this planet to get the good wood and glass out of the bottom of the transom.[

electric chain saw

multi tool

saw blade in angle grinder

hammer and chisel

followed by band aids and beer