FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
I have a 1996 Merc 40hp. I rebuilt the carbs and when I pump the bulb gas shoots out the vent jet. Is somthing clogged, do I need to tear the carb apart or can I adjust something.
After taking the carbs off again and fixing/adjusting the floats/jets and before reinstalling the carbs, turn the carbs upside down and blow into the fuel inlets. If you can blow air through the inlet, the jets are still not seating properly. This test may save you taking the carbs off a third time.