Faztbullet
Supreme Mariner
- Joined
- Mar 2, 2008
- Messages
- 15,938
(1) Bad lower crankshaft seal (2) warped head (3) pinhole eroded into exhaust runner or cooling intake(4) head gasket (5)block erosion are cylinder jug.Do u know how water could be getting into combustion chamber if head gasket is okay?
It will show if cylinder/rings/piston have a problem(lower compression than other 2)Will a compression test show anything
Dose head gasket need gasket glue
Not a new one and only use a used gasket for testing purposes only..always install a new gasket if head is pulled. You can get away with this on smaller motors