FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
rebuilding the carbs on my 1991,88 special.Everything is really clean,no gunk or varnish.When spraying carb cleaner through the passages under the "freeze plugs" found one that's obstructed.What's the easiest way to remove and reinstall these plugs?
Some folks use either a sharp awl or sharp finish nail to punch through the disc and pry it out. Don't go in too far, you don't want to 'bottom out' the awl or nail. Install new disc with dome side out and using a flat drift, flatten disc until it's just flat.
