turtle1173
Chief Petty Officer
- Joined
- Nov 29, 2001
- Messages
- 437
Hello all,<br /><br /> I have been working on my 1976 55 HP Chrysler. After slowly working out the bolts on my Exhaust plate, one of the heads snapped off. I had been using Marvel Mystery Oil Lubricant. <br /><br /> The bolt was coming out but I guess I put too much pressure on it. I didn't think I was but it obviously was enough to break it.<br /><br /> The end of the bolt is very slightly below flush with the surface. It is a 3/8" bolt.<br /><br /> What do I do from here? I have never done this before so please give me step by step help. I've read some previous posts about something called an "EZ Out" but I don't know what that is. Would this be a good option or perhaps something else?<br /><br /> The bolt is in an accessible place so that is positive at least.<br /><br />Thank you for the help.<br /><br />Shane Williams