Does this look OK? Was planning to sand it down and put on one more layer?
C Chasefamily Cadet Joined May 30, 2021 Messages 9 Yesterday at 5:41 PM #1 Does this look OK? Was planning to sand it down and put on one more layer? Attachments Screenshot_20260712_194058_Gallery.jpg 387.2 KB · Views: 13
alldodge Moderator Staff member Joined Mar 8, 2009 Messages 44,253 Yesterday at 6:04 PM #2 @MikeSchinlaub
M MikeSchinlaub Master Chief Petty Officer Joined Jan 14, 2025 Messages 856 Yesterday at 7:21 PM #3 I can't tell from the pics, too far away. It looks like you just layed a square patch directly over some damage? Any grinding before? The closest one looks like a hole. Did you fill it in, if so with what?
I can't tell from the pics, too far away. It looks like you just layed a square patch directly over some damage? Any grinding before? The closest one looks like a hole. Did you fill it in, if so with what?
C Chasefamily Cadet Joined May 30, 2021 Messages 9 Yesterday at 7:39 PM #4 The first one is a hole. I filled it in with liquid resin. I beveled around the hole in top and bottom side and grinded all around it with 40 grit to hopefully create a good bonding surface. Last edited: Yesterday at 7:53 PM
The first one is a hole. I filled it in with liquid resin. I beveled around the hole in top and bottom side and grinded all around it with 40 grit to hopefully create a good bonding surface.
