1995 Mercury 40hp 2 stroke- It Cranks, Has Spark & fuel. Won't start!

A

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,085
Using a wrench or socket ratchet and plugs removed you should be able to turn flywheel easily!! If not, you have a seruius problem. Arevyou able to pull the head off ??
 
H

Hogs Kuiper

Cadet
Joined
Nov 13, 2023
Messages
20
airshot said:
Using a wrench or socket ratchet and plugs removed you should be able to turn flywheel easily!! If not, you have a seruius problem. Arevyou able to pull the head off ??
Click to expand...
Airshot, You hit the nail on the head with That statement!! Emagine my #@*% Surprise when I found Chunks of my Stator jamming up Everything! But a new one on order and I'll probably get back with you & all somewhere around the November 24 Elections! lmbo. Thanks to all Again. (I'll be back)
 
H

Hogs Kuiper

Cadet
Joined
Nov 13, 2023
Messages
20
Hogs Kuiper said:
Airshot, You hit the nail on the head with That statement!! Emagine my #@*% Surprise when I found Chunks of my Stator jamming up Everything! But a new one on order and I'll probably get back with you & all somewhere around the November 24 Elections! lmbo. Thanks to all Again. (I'll be back)
Click to expand...
 
H

Hogs Kuiper

Cadet
Joined
Nov 13, 2023
Messages
20
Hogs Kuiper said:
Airshot, You hit the nail on the head with That statement!! Emagine my #@*% Surprise when I found Chunks of my Stator jamming up Everything! But a new one on order and I'll probably get back with you & all somewhere around the November 24 Elections! lmbo. Thanks to all Again. (I'll be back)
Click to expand...
Is there any Cross Reference or new flywheel part #276-823760 CI?
The motor SS is OG267766. I can Not find Anything on either number!
 

Attachments

  • Inside .jpg
    Inside .jpg
    196.8 KB · Views: 5
J

jeepinandy58

Cadet
Joined
Dec 11, 2023
Messages
27
Hogs Kuiper said:
Thank You Mr. Scott. I'm in the process of that now. Surprisingly when I pulled the large fuel/water separator (oil filter looking) it was crystal clear fuel. However going to continue with y'alls recommended tips. Thank you Sir and all others with their help. This forum is excellent! And the timely response is amazing. Again thank you all.
Click to expand...
Hogs, I'm a rookie here too, just want to add my agreement this form is awesome. One of the things I like is no one makes you feel stupid for questions that are probably routine for them!
 
H

Hogs Kuiper

Cadet
Joined
Nov 13, 2023
Messages
20
jeepinandy58 said:
Hogs, I'm a rookie here too, just want to add my agreement this form is awesome. One of the things I like is no one makes you feel stupid for questions that are probably routine for them!
Click to expand...
Amen Jeep. "like is no one makes you feel stupid" If that was the case I would have gone down in Flames! lol! Good Luck Jeeps. lot of good advice & people on this Forum.
 
H

Hogs Kuiper

Cadet
Joined
Nov 13, 2023
Messages
20
Well. I'm Back. New Flywheel, New Stator. No Spark! Seems to be out of time. However this engine has a Stationary Trigger, it doesn't move. How in the heck can you Time It ?? I haven't changed the Trigger assembly yet. Again Thank you in advance for your knowledge! Hogs.
 
You must log in or register to reply here.
Top