GCartwright
Petty Officer 2nd Class
- Joined
- Jul 1, 2012
- Messages
- 149
Still plugging away, it's either too hot under my canopy or too cold too glass these days , lots of heat coming up from the asphalt and heating up the hull on sunny days , above 90 is too hot for me to be in there
Just about finished putting wood back in, one bulkhead left then it's time to foam under the ski locker and tank, then put some bilge paint down, getting closer
Picked up a used dash panel off ebay for $20 as is, temp sensor didn't work so found a used one locally for $10 so I have oil pressure, water temp and a tach at the least.
Compression checked out at 145 +- 3 across the board, need to inspect the risers and change the starter and impeller
https://youtu.be/nZt7hX81rrY
Just about finished putting wood back in, one bulkhead left then it's time to foam under the ski locker and tank, then put some bilge paint down, getting closer
Picked up a used dash panel off ebay for $20 as is, temp sensor didn't work so found a used one locally for $10 so I have oil pressure, water temp and a tach at the least.
Compression checked out at 145 +- 3 across the board, need to inspect the risers and change the starter and impeller
https://youtu.be/nZt7hX81rrY