1963 Montgomery Ward Sea King / Starcraft Starchief

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Consider this an extension from @tglime I have been trying to find info on this specific boat by Montgomery Ward but it seems to be a unicorn. There are a few references online for the Starcraft Starchief 18' Cuddy, but nothing for the Montgomery Ward variation. As I mentioned the only time I found one was on this site from postings in 2011. As it turns out, it is the same Boat!
 

Attachments

  • IMG_2236.jpg
    IMG_2236.jpg
    3.4 MB · Views: 21
  • IMG_2238.jpg
    IMG_2238.jpg
    2.7 MB · Views: 21
  • IMG_2239.jpg
    IMG_2239.jpg
    2.2 MB · Views: 21

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Demolition Was first on the Docket, the boys jumped right on it. Before we knew it, new flooring was installed, after I flex sealed all of the joints, and rivets of course.
 

Attachments

  • IMG_2245.jpg
    IMG_2245.jpg
    2.6 MB · Views: 16
  • IMG_2254.jpg
    IMG_2254.jpg
    2.9 MB · Views: 17
  • IMG_2265.jpg
    IMG_2265.jpg
    3.7 MB · Views: 16
  • IMG_2276.jpg
    IMG_2276.jpg
    2.7 MB · Views: 16
  • IMG_2277.jpg
    IMG_2277.jpg
    2.7 MB · Views: 17
  • IMG_2279.jpg
    IMG_2279.jpg
    2.1 MB · Views: 15
  • IMG_2289.jpeg
    IMG_2289.jpeg
    1.7 MB · Views: 16
  • IMG_2306.jpeg
    IMG_2306.jpeg
    3.2 MB · Views: 17

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Next Up, was the transom. This needed help! evidently there was an I/O option on this boat so there was a large oval that was underneath a factory cover. I removed the rotten wood, sand blasted the whole Transom. I do some work for a Fabrication company, so we did some labor exchange to redo the Aluminum on the outside, add Aluminum on the inside, along with making a new beefy Transom Cap.
 

Attachments

  • IMG_2308.jpeg
    IMG_2308.jpeg
    2.4 MB · Views: 14
  • IMG_2344.jpeg
    IMG_2344.jpeg
    941.8 KB · Views: 14
  • IMG_2352.jpeg
    IMG_2352.jpeg
    2.8 MB · Views: 13
  • IMG_2358.jpeg
    IMG_2358.jpeg
    2.7 MB · Views: 14
  • IMG_2824.jpeg
    IMG_2824.jpeg
    2.4 MB · Views: 15
  • IMG_2825.jpeg
    IMG_2825.jpeg
    2 MB · Views: 15

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
I know nothing about the Johnson 85HP motor that came on the boat, but there were a bunch of loose bolts, so I am sure there are issues. A friend of mine was nice enough to give me a donor boat with a working Mercury 90. I love the style of these old stacked motors. Plus I was able to take the steering from this boat, and it had a nicer trailer under it as well.
 

Attachments

  • IMG_2960.jpeg
    IMG_2960.jpeg
    2.4 MB · Views: 10
  • IMG_2961.jpeg
    IMG_2961.jpeg
    2 MB · Views: 9

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
The top of the side rails needed help. Not sure how many different items had been bolted to this boat in the past! Off to the Fab shop to dig through the scraps.
 

Attachments

  • 8307B96D-5D42-4F20-919A-954D877548B7.jpeg
    8307B96D-5D42-4F20-919A-954D877548B7.jpeg
    375.6 KB · Views: 9
  • 1206100A-F752-4CDF-B17B-42D061164D96.jpeg
    1206100A-F752-4CDF-B17B-42D061164D96.jpeg
    495.1 KB · Views: 9
  • 75607720-045F-41B6-A6AC-1751E6E1D45F.jpeg
    75607720-045F-41B6-A6AC-1751E6E1D45F.jpeg
    408.7 KB · Views: 9
  • B26E5CE7-6DD6-4913-A1A6-42D1B11A125C.jpeg
    B26E5CE7-6DD6-4913-A1A6-42D1B11A125C.jpeg
    431.8 KB · Views: 9

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,080
Monkey Ward as we used to call it, never actually made anything, instead just put rheir labeling on other mfgrs products, JC Penny was the same...didn't make there products bad, just an issue down the road getting parts !
 

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Monkey Ward as we used to call it, never actually made anything, instead just put rheir labeling on other mfgrs products, JC Penny was the same...didn't make there products bad, just an issue down the road getting parts !
That's why I listed the actual manufacturer along with Montgomery Ward. The Joys of doing a Resto-Mod is nothing going back into this boat is going to be OE parts. May have to break down and get a new windsheild some day, but its good enough right now.
 

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Patches the inside rails today. Makes a huge improvement.
 

Attachments

  • IMG_2983.jpeg
    IMG_2983.jpeg
    2.5 MB · Views: 8
  • IMG_2985.jpeg
    IMG_2985.jpeg
    1.8 MB · Views: 8

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Covering the holes in the roof. Getting very close to being able to do a primer coat.
 

Attachments

  • IMG_2989.jpeg
    IMG_2989.jpeg
    2.1 MB · Views: 4
  • IMG_2990.jpeg
    IMG_2990.jpeg
    2 MB · Views: 6

BOYS & TOYS

Petty Officer 2nd Class
Joined
Mar 1, 2008
Messages
144
Nice to have little helpers. My son helped with everything he could. Now we are having some fun catching some little fish
 

Attachments

  • 20220930_140703.jpg
    20220930_140703.jpg
    1.2 MB · Views: 11
  • 20220930_140709.jpg
    20220930_140709.jpg
    1.2 MB · Views: 11

ski2rule

Seaman
Joined
Jan 11, 2017
Messages
64
Nice to have little helpers. My son helped with everything he could. Now we are having some fun catching some little fish
I know nothing about the Johnson 85HP motor that came on the boat, but there were a bunch of loose bolts, so I am sure there are issues. A friend of mine was nice enough to give me a donor boat with a working Mercury 90. I love the style of these old stacked motors. Plus I was able to take the steering from this boat, and it had a nicer trailer under it as well.
Did you save the swim platform? I put a similar one on my 1963 Starchief.
 

ski2rule

Seaman
Joined
Jan 11, 2017
Messages
64

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
Sprayed the epoxy primer earlier this week.
 

Attachments

  • IMG_3005.jpeg
    IMG_3005.jpeg
    2.9 MB · Views: 8
  • IMG_3006.jpeg
    IMG_3006.jpeg
    2.5 MB · Views: 6

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
First coat of ‘sand dollar’ applied. Turning out well so far.
 

Attachments

  • IMG_3017.jpeg
    IMG_3017.jpeg
    2.3 MB · Views: 10

cadmaster02

Seaman Apprentice
Joined
Sep 8, 2023
Messages
49
On to the cabin! Got the side walls wrapped with carpet last week, as well as painted the interior gray to match.
 

Attachments

  • IMG_2998.jpeg
    IMG_2998.jpeg
    1.8 MB · Views: 8
  • IMG_2999.jpeg
    IMG_2999.jpeg
    1.9 MB · Views: 6
  • IMG_3001.jpeg
    IMG_3001.jpeg
    2.4 MB · Views: 6
  • IMG_3002.jpeg
    IMG_3002.jpeg
    2.3 MB · Views: 8
  • IMG_3003.jpeg
    IMG_3003.jpeg
    2.5 MB · Views: 8
Top