Search results

  1. M

    8 hp mariner

    Hey guys I have a guy that is giving me an 8 hp mariner 677-321206. Could anyone tell me the year of this motor and what it would be worth running? Guy said it needs points and condensers and of course carb rebuild and a new impeller..Thank you.
  2. M

    Idle adjustment knob

    Yes I have a 1993 Evinrude 15hp. Wanted some info on the idle adjustment knob in the shifter handle. Does this knob work like cruise control so to speak? Just screw it in and it sets the speed according to where the throttle is located? I believe mine is broken, just wanted to ask before I...
  3. M

    1982 Evinrude 7.5 E8RCNR

    trying to locate kill switch that is the push button type on the end of the steering handle. Steering handle is not listed on any schematics I’ve located. Any help would be appreciated. Thx
  4. M

    Battery to motor connection. 15hp Evinrude w/electric start.

    This is the SAE battery cable connection I was referring to making. The one coming from the boat will have the same SAE connector. I will connect them on the lake so my push button starter will work, then when I park the boat in the garage, my trickle charger has the same SAE connection. Just...
  5. M

    Electric start with push button.

    Hello, 93 Evinrude 15hp. Just got electric start kit in today with push button start. Paperwork shows to install everything to starter and rectifier. I guess I don’t need a solenoid?
  6. M

    OMC molly lube?

    What type of lubricant can I use in place of molly lube. My manual states to use molly lube to the crankcase boss. Thank you
  7. M

    Electric starter and rectifier

    Hey guys, I have a 1993 Evinrude 15hp. It is a rope start, but I have found an electric start kit for this motor with a rectifier at a great price. My question is this. I want to be able to install a quick connector between the motor and batter wire harness. Like an SAE connector. What is the...
  8. M

    Bolt length and thread pitch

    Hello guys I have a 1993 Evinrude 15hp rope start. I’m gonna put an electric start on this motor. Evinrude part# 0338751. This bolt is 11.99. Does anyone know thread pitch and length? Gonna try to go to local hardware store. Thx
  9. M

    1993 Evinrude 15hp

    Still trying to fine tune this carb. When I first start this motor on the water, I have to choke it and let it warm up. After I idle to where I’m fishing and fish for awhile. I usually have to choke it again before it will start. Is this normal or is it running to rich? Thank you..
  10. M

    Rope start to electric start?

    Hello, I have a 1993 Evinrude 15hp that is a rope start. If I wanted to change this over to just electric start only, No charging system!! What is required? Flywheel, solenoid, and a switch? Thx
  11. M

    15hp Evinrude. I NEED HELP.., please

    Ok guys I have a 1993 Evinrude 15hp E15rletb. The carburetor that is on it is a late model carb, The top cover is part # 0436762 which now superseded to part # 0437985. Which is actually listed under a 1994 Evinrude. This cover has 6 mounting holes and 2 holes for the breather, total 8 holes...
  12. M

    93 Evinrude 15hp. Thx for all the help.

    Hey guys, got the hood and lower engine covers painted and put on the motor. Motor runs great. Thx F_R and racerone for your advice..
  13. M

    Gasket sealant?

    15 hp Evinrude. Doing an impeller change. Thoughts on using a gasket sealant on the silver plate? Yes or no? I’ve seen it done both ways. I personally never have done it and I’ve changed about 10 impellers? Thx
  14. M

    What is this stuff?

    Purchased this motor awhile back. Converted it to short shaft. Got it running. It’s running on both cylinders. Ran it with muffs. Pulled lower unit to change impeller and pressure test. What is this stuff? Could it be sea foam or some type of fogging that is just burning off? Thx
  15. M

    Idle passage screw adjustment?

    Hello, I have a 1993 Evinrude 15hp. Is there a setting for the idle passage screw? It’s flat on one end. I know there is a slow speed adjustment on the top rear of this carb., Thx
  16. M

    Carb help please

    1993 Evinrude 15hp. I just converted this long shaft to a short shaft and had someone rebuild the carb. Why would fuel or whatever be coming out of this hole. It looks like old gas, but the carb was taken apart and cleaned. It’s not the gas I have in my tank. My gas has a blueish tint to it. Thx.
  17. M

    Throttle cable routing

    Does anyone have pictures they could share showing the routing of the throttle cable on a 1993 Evinrude 15hp. I’m just concerned about the loop in the cable. Looks odd to me. Thx..
  18. M

    Shift rod??

    I have a 1993 Evinrude 15hp. Changing long shift rod to short shift rod. Anything I need to know before taking out and reinstalling? Thx
  19. M

    Evinrude driveshaft?

    1993 Evinrude 15hp. I’m looking for part #0341590? Saw a couple on EBAY, The price is outrageous. Does anyone know of a webpage that swaps parts or sells boat related items? Like AOMCI? Thx
  20. M

    Shift lever?

    Hey guys I’m converting a 1993 Evinrude 15hp from long shaft to a short shaft. When changing out the shift linkage do you just screw one out and screw the other one in till it bottoms out then you make the proper alignment?
Top