Search results

  1. D

    now,electrical problem BE120

    Something new to wrap my head around,hopefully with you guys. I removed a piece of plastic inside controlbox,then one wire has been in contact with ground,beacause battery was empty. Have now charged battery,but it refuse to fire,that means no spark. Is it possible the powerpacks died from this...
  2. D

    engine height quest

    Is it the lower fin or upper one, on gearhouse that should be flush with center of boat floor,in a lack of better therm for it but i hope you understand.
  3. D

    90 or 120 evinrude

    Well i bought this motor yesterday,it was annaunsed as a 90hp. When i came home,i read be120tlco on id sign outside tilt unit. There is no nr on those cirkled downsunked id chips around on block. Does 90hp cover and 120hp one fits eachother?
  4. D

    evinrude be120tlco kill switch problems

    Ok i just found out the kill-switch is making probs. Dusconnected the main plug and jump started it,and it started right up. Can i just cut the two leaders going onto the kill-switch?
  5. D

    evinrude be120tlco

    Got this motor yesterday.between cylinders there is a black box shaped as powerpack,but inside there are two relays and some connecting spots. This motor came with a harness to this box,with 6 leaders total. Colors are,blue with white stripe,green w/white stripe,red w/white stripe,black w/brown...
  6. D

    startmotor johnson 85esl73m

    Ok,once a thing is fixed,more problems occur. Start motor just click's when trying to start,batteri in use holds over 14v so that is ok. Is the starter done,or is it something simple to fix?
  7. D

    ignition lock evinrude powerpilot

    This just fell apart and is not working,there are total 6 wires to it: white,black w/yellow stripe,purple w/white stripe,red,two black. Now only the wires are hanging out of the hole where the lock is suppose to sit. Wich ones to connect and so on to make it start and stop so i can use the boat...
  8. D

    stator johnson 85ESL73M

    Last fall i found the problem,stator was leaking and caused misfire,and not fire at all. Now its spring and i need a stator. talked to a local outboard-dude,who wondered if the ignition system could be switched with another ignition system that he had laying around,with sparkplug wires attached...
  9. D

    propeller johnson 85 hp

    propell wich is mounted now is 13 1/4x17,its beaten up and pretty old (hub-vis). wich prop should i buy? engine is on a 15 fot boat. one thing i noticed when testing it was that i had to use "much" throttle to get it in plane,i should get one prop that gives better torque from still position?
  10. D

    how to check if power pack is ok

    Johnson 85esl73m just died here the other day,no spark on either cylinders. How do i check the power pack is ok? can it be done with a multimeter?
  11. D

    ignition switch evinrude powerpilot box

    Engine is johnson 85esl73m. -I found out that both + and - clamp on battery where dirty and gave bad connection,the starter run good after cleaning them. There where som leaders inside control box that needed to be sorted out better for space sake,one white from the start position switch rubbed...
  12. D

    hot upper-stem johnson 85 hp

    Done a pretty long test run on johnson 85 esl73m,about 30min,seems to be working ok. control unit did piip one time but after that i have heard nothing so i kept testing for 20 min without ant piip and it runs well i must say. The area around the two holes on upper-stem,right belov the lower...
  13. D

    cold run throttle johnson 85 hp

    last one for now,but does this engine (johnson 85esl73m) have a kind of restrictor that blocks full throttle when cold? when testing yesterday throttle handle suddenly loosend and worked normal after being stuck. i guess it took a minute or so before i cold hit full throttle after starting cold.
  14. D

    "timing-arm" johnson 85esl73m

    The arm under flywheel that follows the throttle arm,i dont know the word for it, but it shold go back when throttle is pulled all the way back to idle right? mine does not,it stays forward. quest nr 2: does someone have a picture so i can adjust mine right? last time i fired it up it sounded...
  15. D

    hot upper cyl 85hp v4

    Dont remember cyl nr,but the upper one on right side gets damn hot compared to the three others. I been told a time ago that bor and mount a nippel to let air pockets to get out,beacause this one doesnt have control-pee installed from factory,but the casting in blockside is ready to be borred so...
  16. D

    oil gearcase johnson 85hp

    How much oil does it hold? i pressed in about 350-400ml and it started to come out the upper hole. but it seems very much too little? engine is still johnson 85esl73m.
  17. D

    steering question johnson 85hp

    I have full turn to right,but not left. multiflex manuel steering thru tiltube. between end of steeringcable and engine there is a link,mine is 280mm long,do i hvae to get a 300mm link to solve this problem? engine is johnson 85esl73m
  18. D

    mounting tilt-tube johnson 85esl73m

    I cant wrap my head around this issue,each end of tilt-tube has a nut,these two nut slides into a nut-shaped casting in the tilt-frame. How in all mighty does one screw this into it place the right way?? i tried to screw nut all the way in on steering-cable side before puhsing it in holes to...
  19. D

    '73mod johnson 85 hp spark issues

    Tried to start it earlyer today after couple of weeks not running and it did not start,looked at the spark plugs and on syl 1 seemed dry and shiny,no spark? maybe some bad coils? - How do i check if they are ok? i do have a multimeter. is there a way to check if the power pack is ok? i do know...
  20. D

    solas prop johnson 85hp

    Found one on ebay,'solas amita 3 style'. Why should i not use/use this prop on johnson 85esl73m? i understand there is a couple to choose from with different pitch's. The boat i have is a rebuildt 19 fot daycruiser. the rear is cut to fit a 21" outboard shaft. what decides what the pitch on...
Top