Search results

  1. C

    12 pin controls to 8 pin engine harness question

    I have a set of controls from a late 70's V6 with a 12 pin harness. My engine is a mid 80's V6 with an 8 pin connector. Is there an easy way to adapt the two or do I need to just get another control box? Thanks, Scott.
  2. C

    2.4 200 flywheel installation.

    The flywheel is off of my motor and unbolted from the hub that bolts to the crankshaft. There is no flywheel cover on this motor so I'm not sure where the timing marks should be facing. The motor is at TDC. It looks like the flywheel will bolt to the hub in any position. I can make my own...
  3. C

    Which control box for a 80's 2.4 Mercury 200?

    I have an eight pin harness. What years or model number controls will work? Thanks, Scott
  4. C

    4.5hp no spark on one cylinder

    Hoping someone here can help me out. I am not getting a consistent spark on the top cylinder. I have swapped coils, plugs, and wires and the problem remains on the same cylinder. I have also pulled the flywheel to look for anything obvious but everything looks perfect. Where should I try next?
  5. C

    150HP to 4.5HP coil interchangability?

    Is "Interchangability" even a word? Anyways.... I have a 1982 4.5hp that is losing spark on one cylinder. I also have a whole box full of coils for bigger Johnson and Evinrude motors that appear almost identical. The only physical difference is the 4.5hp coil has 2 wires coming out of it. One...
  6. C

    Outboard machine shop in S.C.

    Anyone know of any near Myrtle Beach South Carolina that they can recommend? I need a couple holes bored. Thanks.
  7. C

    2002 DF90 water mixing with oil

    My buddy just repowered his 17' scout and sold me the Suzuki 4 stroke that was taking on water in the oil. I'm going to order some sort of service manual but wonder if a manual on CD fron Ebay will suffice. I don't want to invest alot of money if I'm going to have to part this thing out on Ebay...
  8. C

    Johnson GT 200 identification help needed.

    Re: Johnson GT 200 identification help needed.
  9. C

    Johnson GT 200 identification help needed.

    Re: Johnson GT 200 identification help needed.
  10. C

    Johnson GT 200 identification help needed.

    I bought an old Looper as a parts motor and the tag on the clamp is either missing or painted over. Where can I find another number identifying the year and model of this motor? Any other clues to look for to narrow it down?
  11. C

    Suzuki DT115 lower unit not shifting.

    My 1988 Suzuki DT115 was grinding more than usual going in and out of gear last year and eventually would not shift fully into reverse. I went to take the boat out Saturday and it wouldn't shift into forward or reverse. I unhooked the shift cable so I could shift it by hand under the hood but it...
  12. C

    Re-ring. Flex hone grit?

    Going to hone and re-ring an old 150 Crossflow. I plan on using a Flex-Hone and to follow that up with a plateau brush. I have a factory manual and it states to "use a medium grit cylinder hone to resurface walls". The Flex-Hones I see mostly come in 120, 240, and 320 grits. Is it safe to say...
  13. C

    Suzuki DT 115/140 tachometer?

    So I was running down the ICW and crossed a large boat wake at maybe 3k rpm and the engine died because the kill switch was pulled by me either sitting on the chord or it was in my pocket. The tach quit working after that? It now reads between 0-1000rpm when the range should be 0-6000. I have...
  14. C

    Tilt Tube REALLY stuck. Cut it?

    I have a 1990 Evinrude 150XP i got for fairly cheap but the little things are starting to add up. I plan on fixing up and painting this motor and rigging it to my boat over the winter when I have some down time. It came with controls and dual cable steering cables and helm. One cable worked and...
  15. C

    Suzuki DT140 to an Evinrude 150XP

    I have a DT115 with 140 carbs and intake now on my 16' Checkmate and am about to bolt on an Evinrude 150XP V6. What should I expect?
  16. C

    1990 Evinrude XP150

    Looking for a factory service manual. Just picked this motor up and it doesn't run. Have time to tinker with it because my current motor runs fine. Should I get a factory manual or would a Solec or other suffice? Is the online subscription offered with the Solec manual worth the extra money...
Top