Search results

  1. M

    Trigger replacement

    86 25hp evinrude, replacing trigger, my question is there a specific gap between trigger and crankshaft .
  2. M

    Trigger melt

  3. M

    Trigger melt

    Think for I bought it, had a overheat problem. A new head gasket was put on before I got it. It has been hard to start and won't idle. The charging coil melted too
  4. M

    Trigger melt

    Haven't had this motor long. Hard starting , won't idle right. Think I found problem, charging coil melted to. Think a overheat problem cause head gasket replaced before I bought it.
  5. M

    Trigger melt

  6. M

    Coil check

    Hard to start, spark plugs showing weak spark...runs and dies and bucks and kicks likes a mule. Don't say carb. System been thru .
  7. M

    Coil check

    86 with cdi
  8. M

    Coil check

    Ck coils on my 25hp evinrude, secondary great primary reading 03.5. Doesn't it supposed to be .03 to .15
  9. M

    Want idle

    Don't know what 71 is, I'm thinking it's electrical from wiring on kill button
  10. M

    Want idle

    Here's one, coming out of my tiller one big line which I guess is throttle, 2 small lines which I guess is kill switch. that doesn't work. One wire goes to ground the other to plug above my thermostat. Is this kill switch wires. If so found something interesting, semm to be fused together below...
  11. M

    Want idle

    Mid range and up, runs great. It's like I'm pulling air and making it to lean
  12. M

    Want idle

    And also has manual primer
  13. M

    Want idle

    Bought in feb. Always had this problem
  14. M

    Want idle

    Sneezes on restarts
  15. M

    Want idle

    86 25hp evinrude can't get it to idle. Carb newly rebuilt new plugs. I start at 1 1/4 turn to start then 1/8 turns looking for that sweet spot. Idle and jerks then goes dead. Top end speed great, compression good. Any ideas, missing fishing.
  16. M

    Carb

    K...go my boat guy see if he's got a early model carb with choke
  17. M

    Carb

    I know, these carbs don't exit for this year 25
  18. M

    Carb

    Don't like it, still have to put hand in carb to crank, want simple carb with choke
  19. M

    Carb

    Can a 86 25hp evinrude with manual primer be replaced with a carb from little older 25 with a choke
  20. M

    Low speed idle

    Replaced thermostat, bought this motor 3 months ago
Top