Search results

  1. M

    Low speed idle

    120 psi, new fuel pump. Tiller. This motor has primer instead of choke. Still put hand over carb to start when cold. Is it possible that I'm getting fuel bleed thru primer when running at idle to flood me out
  2. M

    Low speed idle

    86 evinrude 25, idling in gear the carb seems to load up then motor goes dead. It's a bear to restart, pull plugs they're usually wet. Rebuilt carb, low speed adjustment has little effect.
  3. M

    Lead shot in my 86 25hp evinrude carburetor

    Thanks guys for y'alls help. Problem solved. 2 of 3 pinholes for low speed and idle plugged up. Purrs like kitten now. Thanks again
  4. M

    Lead shot in my 86 25hp evinrude carburetor

    Fixing to ck diagram
  5. M

    Lead shot in my 86 25hp evinrude carburetor

    What kind of test device
  6. M

    Lead shot in my 86 25hp evinrude carburetor

    Runs great up on power band, just can't get it to idle hit and missing on one cylinder
  7. M

    Lead shot in my 86 25hp evinrude carburetor

    Good spark, bulb pumps up hard. Running to rich in no.2 cylinder
  8. M

    Lead shot in my 86 25hp evinrude carburetor

    Took pump off, notice the hole that feed vacuum to pump was wet
  9. M

    Lead shot in my 86 25hp evinrude carburetor

    Thanks I'll ck that, that's the cylinder that's running rich that operates the pump
  10. M

    Lead shot in my 86 25hp evinrude carburetor

    Cold start idles great till it warms up, then start shaking like flooding out. Rebuilt carb. Ck plugs, 1 good burn the other black
  11. M

    Lead shot in my 86 25hp evinrude carburetor

    What does that lead shot do. Is it for low speed idle
  12. M

    Pee tube

    Not overheating, nice flow output, warm to hot no pee tho
  13. M

    Pee tube

    Just bought it, run it waterpump output great always first thing I checked
  14. M

    Pee tube

    86 25hp evinrude, water pumps great. Nothing out of pee tube...line from block is clear
  15. M

    Low speed, 25hp bucks like mule

    Yeah Right
  16. M

    Low speed, 25hp bucks like mule

    Carb rebuilt, spark good, bottom end good, power head problem
  17. M

    Low speed, 25hp bucks like mule

    Just bought it
  18. M

    Low speed, 25hp bucks like mule

    Cold start compression 110psi both
  19. M

    Low speed, 25hp bucks like mule

    New fuel, vented, just bought it. Says to pump twice to fuel the head. Pump 4 times to get fuel to the primer. Also pulled low speed screw, was bent about 30 degrees
  20. M

    Low speed, 25hp bucks like mule

    86 25hp evinrude with Manuel primer pump. ( What frigging genuis come up with ditch the choke). Problem is full speed fine, mid range to idle it bucks and kicks like on one cylinder then goes dead...Suggestions anyone...
View older results
Top