Search results

  1. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    Dock lines Boat project update: If you've watched the First Splash video, you'll recall that the boat wouldn't take throttle well enough to plane out. Since then, I've gone through every possibility (there were several) and am eliminating them one by one. Well, Sunday was a breakthrough! I...
  2. Reserector_

    73 Sea Ray restoration

    Agreed. Thinking too far ahead can be discouraging. There are exceptions, however. Thinking of the end result, as you are doing, is one. The other is thinking ahead with regard to parts and supplies that you need to put on your radar for the upcoming steps. Keep throwing those motivators...
  3. Reserector_

    What to use to repair stringers

    "HI, Mr. H!! Welcome to the group. Tell us how you felt when you first realized that your stringers were the consistency of porridge. Remember...you're not alone. We're all at different stages of this."
  4. Reserector_

    1986 Bayliner Capri 2150 Bowrider - Rear Seating

    Naw! We're like a support group. "HI, DWhitefield!! Welcome to the group. Tell us how you felt when you first realized that your stringers were the consistency of porridge. Remember...you're not alone. We're all at different stages of this."
  5. Reserector_

    1986 Bayliner Capri 2150 Bowrider - Rear Seating

    Many companies set their MODEL YEAR change for July of the year. So, for example, if yours was built in July or later during 1985 it was an '86 model. That may or may not explain why yours looks like the '86 model.
  6. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    Boat progress update from the Department of Redundancy Department.. Our motto is "Anything worth doing is worth doing twice. " I tore it down to the block and found that the water leaks were from my JB Weld repair. I think I should have prepped the surface better because some places held and...
  7. Reserector_

    Stringer replacement - Weep Holes

    Other positives about a proper foam fill is that it sound-deadens the hull and stiffens it.
  8. Reserector_

    Stringer replacement - Weep Holes

    That "Repair" looks like a quick, cheap, shoddy job to be honest. Cheap rough plywood is the least of the sins. Barely any tabbing to the hull. Bare wood coated with some red stuff that clearly did not seal the wood. Cavities not filled with foam as they should be. If they did not replace...
  9. Reserector_

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    You had an ash hole help you with the boring work. Clever.
  10. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    Found a pic of the painted, rebuilt axle beam. Too late to edit an earlier post. The offset spindles forced me to rotate the brake flanges a bit, but disc brakes don't care. As long as they're at noon or rearward.
  11. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    All done except for attaching the hoses and bleeding the system. The original coupler was welded on eight ways from Sunday. Ridiculous is an understatement! I hope that company is out of business. They deserve to be. Took me hours to cut that thing off. It should've been bolted.
  12. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    The axle beam is rebuilt and repainted. Brakes are installed. The axle is back in place and wheels are on. The surge coupler is next. I'll have to drill the plug welds out of the existing coupler to remove it.
  13. Reserector_

    '90 Maxum 2100SR - restoration & conversion

    Good progress. Make the most of this good weather and the holiday time off. But don't rush and miss the enjoyment of the work.
  14. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    The dimensions are the same, but there is a grease fitting at the end. the fitting might have to be removed, but that defeats the EZ Lube feature. EZ Lube pipes grease to the back of the rear bearing allowing you to push out the old grease.
  15. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    I should be able to modify the HF carrier I have using the leftover parts! I'll even have a spare spindle if I really get in a jam. Thanks for the link @Meames1 I just wonder how I'd keep it from spinning while tightening or loosening the lug nuts... ...weld something behind it that prevents...
  16. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    I stumbled across YouTube videos about anti-syphon valves failing. I have one on my tank and don't need it because the tank is the lowest point in the system. They say it can cause a restriction that affects the top end. That may have been part or all of my problem when I tried to get up on...
  17. Reserector_

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Yayy!!
  18. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    So from what I just read on Michael Romer's YouTube channel in the comments, Volvo Penta issued a Tech Bulletin saying to leave out the exhaust flappers. They are ineffective and cause more problems than they are worth. I will be removing mine for good measure. I think my problem is timing...
  19. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    Oh it'll probably never happen again to me.
  20. Reserector_

    Building a '93 Caravelle 1750 Classic Bowrider

    I forgot to mention my noob mistake while pulling the boat out of the water. Pretty classic, actually. My two sons were in the boat as I started up the ramp. One says to the other "Shouldn't the thing be up?" Then it hit and they yelled "DAD!!! STOP!!!" I stopped, and (thinking there was...
Top