Search results

  1. K

    New valve cover gaskets and still leaking V6 4.3

    0W326935 I dont know If its straight, should i snug bolts more ?
  2. K

    New valve cover gaskets and still leaking V6 4.3

    Hello fiends, I bought new gaskets from Felpro, blue one, replaced and torqued to spec… still have some oil seeping from the rear corners… any ideas what to do? Use some silicone sealant??
  3. K

    Water leak to the bilge from transom please help

    I have tried trailer position full UP and still nothing, later with helper I will try different position UP/DOWN+Wheel left right.. I will keep You updated
  4. K

    Water leak to the bilge from transom please help

    short Update, Weird. i was on the boat, i did even short trip but the leak stopped somehow, water level was almost the same as ive left the boat. Ill keep an eye on that… The worst thing is I am not able to reach or even find transom nuts in the starboard side… I bought trim Manifold gasket...
  5. K

    Water leak to the bilge from transom please help

    Is there solution to find the leak somehow by filling boat with water? Where to look for
  6. K

    Water leak to the bilge from transom please help

    Here’s the video I made while on a bot you can see in full screen the water leak when it comes…I’ll try to sneak some go pro camera maybe tomorrow to see what’s going on… Bellows? Y-pipe?? Gasket under Trim hoses?? Shifter Bellows? I’m not sure if I can fill bilge with water to that level and...
  7. K

    Water leak to the bilge from transom please help

    Should i Put some marine sealant on the new gasket under this trim hoses Or aviation gasket? Replacement is Just unscrewing the nuts,pulling down, cleaning and new gasket in? Thanks Can it be shifter bellow?
  8. K

    Water leak to the bilge from transom please help

    I will do it tommorow… do You know the procedure for replacement That gasket? Ill give it a try If its possible to do it on the trailer ?? I have replaced shift shaft bushing and seals and new impeller before putting to the water How about upper pin seal? Is it possible to leak?
  9. K

    Water leak to the bilge from transom please help

    From what I have noticed from other videos I can see the water is cumulating where I’ve marked with red The boat is not That old… you Can see old Bayliners from 80/90 still crusin…
  10. K

    Water leak to the bilge from transom please help

    It might be quite difficult/impossible to use boat on the trailer… How to check if it’s bellows or transom?Quadring ? I have boat for 5 years and I haven’t replaced it yet, doesn’t look bad for me but .. who knows When fully up I can see only the water hose is cracked .
  11. K

    Water leak to the bilge from transom please help

    Guys please tell me what to do now… wait till winter and enjoy the rest of the summer finally Or…? I live in Europe and it’s rare to find good mechanic. I will have to figure it out by myself with your help as always.
  12. K

    Water leak to the bilge from transom please help

    I don’t think it’s crack, boat is 2005 Caravelle
  13. K

    Water leak to the bilge from transom please help

    I don’t know, it’s difficult to see something there, to take this picture and even notice the leak I had to crawl and use phone… do you have any other ideas Chris how to check it? What do you think Maybe bellows?? Maybe hole under the anodes under the trim hoses ? I’ve just slipped boat and I’m...
  14. K

    Water leak to the bilge from transom please help

    Hi friends, Finally boat on the water but I’ve noticed water leak, I don’t know if it was last year because always I had some water in the bilge. this year I’ve noticed some leak from the transom. It’s getting from where the bolt is visible I think Is it bellows or something more serious...
  15. K

    Marks under valve cover

    I was inspecting the elbows and exhaust so why not to replace the valve gasket ? I think oil was seeping on the corners also but will see
  16. K

    Marks under valve cover

    I am wondering about this white markings under the springs, whats that? its solid I cannot scrap it by finger, at 1st look I tought it looks like water in oil but its not... ??
  17. K

    Marks under valve cover

    Hello Anyone experienced this white marks under the valve cover? Is it factory markings ??
  18. K

    Flakes from risers manifolds when flushing

    Yes I drain few times during the season
  19. K

    Upper shift shaft washer

    Hello ive Found 2 washers in my box, which one has the right thickness according to OEM ? Can anyone measure it for me pls? Ok Found the thickness is .030 so the left one 😬😬 have a great day
  20. K

    Flakes from risers manifolds when flushing

    Hey! Dry joints, freshwater, inspected and No leaks but when flushing with hose there are some flakes from rust(?) how to flush it correctly ? Thank You
Top