Search results

  1. ESGWheel

    Gurgling coming from exhaust

    Sounds good. And you never defiantly said but since you are running on a hose (not muffs), your flushing hose connection is the blue cap style (see post 6) and picture below. Is this correct? (not trying to be rude, just double checking....) And for reference, my 2005 5.0 GXi-E running on the...
  2. ESGWheel

    2003 5.7 gxi Volvo penta seems to go into safe mode with no alarm

    Ah, got it, pressure test at speed already done 😊. And other potential issues addressed. So now it’s into the computer as you suspect. Only thing I can think of is to use a test light hooked into the backside of the injector plug and seeing that the signal to fire the injectors ‘goes away’ or...
  3. ESGWheel

    4.3 GL water in oil

    You did not mention if you detected water in the oil pan (dipstick with dreaded milky foam) or if you changed out the oil and/or oil filter and found evidence of water. Where I am going with this is I wonder if it was condensation build up vs. water jacket leak. Also, something that is...
  4. ESGWheel

    Gurgling coming from exhaust

    Clearly, it’s much harder to do this via back-and-forth postings vs. being there and I am not sure I can help further but I will give it a try. The symptoms you are having is overheating. With the boat in the water, it overheats at the dock at idle or perhaps at a slightly elevated RPM. Even...
  5. ESGWheel

    Volvo Penta 3.0 Beeping and Ggoing Into Limp Mode

    this may help to find the serial no. link
  6. ESGWheel

    2003 5.7 gxi Volvo penta seems to go into safe mode with no alarm

    I assume your 30 PSI fuel pump pressure was taken while idling and sitting at the dock, correct? Flow requirements are minimal at idle compared to 4500 RPM. Its possible you are not getting the flow (volume) needed at 3000 RPM and higher which seems to you as if in ‘safe mode’. Your lean...
  7. ESGWheel

    2003 5.7 gxi Volvo penta seems to go into safe mode with no alarm

    Sargetreetrunck, a couple of thoughts: if you changed up the wires, should also do the rotor and cap unless new recently. And if suspect the fuel pump, which these circa pumps have paint issues, check out this link.
  8. ESGWheel

    VP 5.0GXi-B issue - low RPM/problem with a plane

    Here is a video (link) in how to use a Piston Stop Tool and find TDC. As AllDodge says its involved and as the video highlights you can damage the piston if you use the starter motor (or do not have a good feel while turning over the motor by hand). You need to have ALL the spark plugs removed...
  9. ESGWheel

    Parts lists with part numbers

    I just check that out (s/n) and so much better! Thank you for highlighting that aspect!
  10. ESGWheel

    Bow runner Garmin install

    Necessity is the mother of invention! Nice job! Also here is a workaround way to post pic on the forum link It works! 😊
  11. ESGWheel

    Parts lists with part numbers

    I will PM you several sites I use for genuine VP parts.
  12. ESGWheel

    Posting photos with ImgBB

    for this step i did select everything and then pasted it to a word doc where it was easy to delete the unneeded portions. Thanks again!
  13. ESGWheel

    Posting photos with ImgBB

    test pic uplaod
  14. ESGWheel

    Posting photos with ImgBB

    THANK YOU!
  15. ESGWheel

    Parts lists with part numbers

    Apologies I must have fat fringed the part no. or looked up the wrong variant. I have found that this link uses a parts finder like how the old VP store worked. I looked up your engine and sure enough came back with your number 3817287 for the belt and 3885250 for the tensioner and 3861009 for...
  16. ESGWheel

    Parts lists with part numbers

    It should be VP Part No. 3586326. What aftermarket brands / part nos. also work i do not know. At one point i got told a Goodyear Gatorback 4060990 would work. I do not recall it if it was too large or small, but did not work. I used to use the iBoats parts store as the master part no...
  17. ESGWheel

    1999 Volvo Penta 4.3 - no reading on temperature gauge

    I’m not familiar with this design but looks ok. Hopefully others will chime in. Get yourself an IR gun > they are inexpensive (u don’t need a high end one) and a good diagnostic tool to have. Also if u do not mind: start another post under “Other > iBoats Fourm and Website Issues “ on how you...
  18. ESGWheel

    1999 Volvo Penta 4.3 - no reading on temperature gauge

    Easy peasy to test and do not forget to check the +12V at gauge. See post no. 9 of this link And post no. 3 of this link
  19. ESGWheel

    12V battery system - adding ACR

    @SlipperyOar: I was reviewing some of my notes and posts on ACRs and realized that I made a mistake in my post #4. I had assumed your engine's alternator output well exceeded 12 amps, hence my comment / concern. I now see you originally posted the output of it is a max of 10A which I missed...
  20. ESGWheel

    1999 Volvo Penta 4.3 GL - No fuel pump or crank

    Makes total sense, time to enjoy! And it looks like you just figured out a workaround for the site’s issue about posting pics! Double Congrats!
Top