Search results

  1. D

    1990 Bayliner 2651 Fuel tank dimensions

    Good day all! Looking to remove/ inspect/ and-or replace my fuel tank. I can determine the width of the tank since it’s viewable from the engine compartment I’m just not sure of the length. I’ll need to cut out from the aft cabin. Anyone know the length of the tank? Anything else to consider for...
  2. D

    Weight of my boat

    A 20’ PENN YAN cruiser from 1980 does not show in the NADA VALUE AND PRICE GUIDE. once you have the correct model you can go there and get all specs. Value, weight, beam etc.
  3. D

    Marine plywood edging (cabinetry)

    I agree with KJM… doesnt have to be marine ply. HOWEVER I’d seal it with poly urethane due to the moist environment OR consider Formica or some other laminate for the final finish that will hold up.
  4. D

    1995 Bayliner Capri 1800LS bimini suggestions

    I’ve got a 16ft 93 Capri. Southkogs is correct. The hardware on the side windshield is for the convertible top that was kinda a roof but is very low. It was canvas and snapped to the windshield. I assume you no longer have it. Going big vs. small is better with the bimini. Better rain...
  5. D

    70hp Force shift adjustment

    Having a bit of an issue with shifting into neutral. When I throttle down from forward to neutral I must go just a little past neutral to get prop to actually get her out of gear. Seems like a small fix. Question is- Should the adjustment be made on the stainless steel rod adjustment nuts on the...
  6. D

    Transom replacement

    Looks like you have your work cutout for you. I’ve heard people use a chain saw or use a long pry bars to remove the rot from the transom. From the pics it looks like the wood should come out pretty easy. Good luck. Take lots a pics.
  7. D

    Who has starting doing all their own maintenance?

    Agree with those above. You can do your own maintenance. With the correct manual and help from the folks on this forum you can do just about anything. Ive been an outboard guy for 25 years and a couple years ago purchased a project boat. Spent last winter tearing down and rebuilding an alpa 1...
  8. D

    Reupholstery, maintenance ?s, radio

    Welcome aboard! re doing marine vinyl is a pretty simple job as long as the wood underneath is in good condition and there aren’t many complex cornerstone navigate.I’m doing mine now.Marine vinyl is relatively inexpensive ( I just paid $20/ per yard from a local fabric store). Measure what you...
  9. D

    Chips in the gel coat on hull. Is it an issue?

    I agree with all above! Easy fix..... buy the kit (I’m on my second purchase).....follow instructions. Toughest part will be to match the color...try and do some color testing before you put it on the boat... dried gelcoat looks different than wet. Good luck.
  10. D

    Sewing Machines

    I’m in the process of redoing my seats. Using a standard semi professional surger sewing machine (left over from mother in law). Use at least a size 14 needle. Set the needle stitch length at 4. If you have a Teflon foot it helps but not critical. Set machine on slow Speed. Vinyl is relatively...
  11. D

    Power Washing

    Watch out for decals and delicate stuff...
  12. D

    Power Washing

    my power washer is my favorite tool in the garage. Sure you can power wash the hull... just don’t use the most abrasive nossel that could hurt the gelcoat.....
  13. D

    Replacing snaps

    The snaps on the hull Charlie. Just wondering if i should fill holes with FG after removing the snaps redrill or just shoot 4200 and replace snaps with larger screws.
  14. D

    Replacing snaps

    Looking for advise on replacing/ cleaning boat top snaps. They are 30 years old and are looking tired. Some snaps are screwed in, some riveted, some are flat out gone. Whats the right steps in replacing or cleaning up those that are there. Curious as to what folks out there have done.
  15. D

    1993 mercury force 90 hp not starting

    in addition to racerone‘s response.....Could be the reed block, fuel pump, timing issue... could be a carb issue...lots of things read Frank A’s stuff in the stickies.... he was the man on Force engines
  16. D

    The art of Alpha One Gen One Maintenance

    Looks like your organized to the T..... throw out the climber manual... useless imho.... the #6 manual will give you the exact specs to get things write. rebuild kits with all seals are readily available. I did mine last winter...took the entire upper and lower cases apart.... replaced all...
  17. D

    Is there a pee hole on a force 1996 Force 75hp outboard ?

    I’ve got a 93 Force 70hp that has a telltale..... EVERY year I’ve got to clean it out before the season starts. Invariably the bugs get in there...it’s one of the first things I check before firing her up for the season.
  18. D

    Bottom paint removal

    What is the best way to remove bottom paint? I’ve seen everything from oven cleaner to scraping to sanding being discussed. Any thoughts/suggestions? I’m reviving a 1990 2651 Bayliner. Looks like there’s several coats of various paints. I don’t think the PO(s) took the time to do it right and...
  19. D

    Old insta trim tab hoses

    Looking to replace the old hardened trim tab hoses on a 1990 bayliner 2651.... old insta trim motor works well.....the hoses are rock hard and need to be replaced.....the hose Is readily available on line....... what’s the process for getting the new trim hose off the trim tab cylinder and...
  20. D

    Solenoid for 1990 mercruiser oildyne trim pump

    Can automotive solenoids be used on a the trim pump or must they be a mercruiser/ Sierra/ or marine application only?
Top