Search results

  1. B

    86' johnson 110hp timing specs

    Hey everyone. Happy Labor Day. Does anyone know the timing specs for my 86' Johnson 110hp model j110tlcd? I was going to attempt the Reeves timing procedure to check the timing but I'm guessing I shoul know the correct timing first. I have located the #1 cylinder already but that about all I...
  2. B

    1986 johnson 110hp flywheel torque spec

    Hey everyone! It's been a while and I'm still at it. Finally got my 110 johnson up and running! Problem ended up being a broken woodrift key on the flywheel was sheared off due to improper flywheel tightening. Anyone know what the proper spec is to tighten down the flywheel? It's a 1986 Johnson...
  3. B

    50hp Lark control box help

    I recently bought a 1972 evinrude 50hp lark with hydro shift model number 50273c and it has no control box. I found a control box online for sale from a 1970 85hp lark with hydro shift. Are the 1970 controls compatible with my 72'?
  4. B

    1972 Evinrude 50hp Lark question

    I picked up a 72 50hp lark today model number 50273c for $50. Brought it home and decided to test it to see if the starter worked and if it would turn. Jumped the starter and she spun not problem. Next I tested to see if the compression is good. Both cylinders were about 175lbs. Then I checked...
  5. B

    1986 johnson 110hp still won't start

    Tested the stator today and the resistance was 386. Cdi says the stator should test in at 460 to 600. Would this prevent the motor from running? The model number is j110tlcdc. Rebuilt both carbs replaced plugs and wires. Has spark that will jump 7/19". Compression was 110,110,110 and 95. Now all...
  6. B

    1986 Johnson 110hp with trim has weak spark

    Hey Everyone! I recently purchased a 1986 Johnson 110hp model # J110TLCDC ob and am having trouble with spark. Ive purchased a gap tester and tested each wire from each coil and the spark barley jumps a 1/4" gap. I've installed new plug wires and tested the resistance on each coil which all seem...
  7. B

    1980 chrysler tri hull with 1986 Johnson outboard

    Re: 1980 chrysler tri hull with 1986 Johnson outboard Console repair. Next comes the stainless steel and the new gauges and switch panel. I must say the pump system on the resin and hardener couldn't have made to process any easier. I had done some glass work in the past and always had to...
  8. B

    1980 chrysler tri hull with 1986 Johnson outboard

    Re: 1980 chrysler tri hull with 1986 Johnson outboard Thank you. I really like the boat too. The deck is all fiber glassed. Im guessing the screws are holding the carpet down at the moment. The fiberglass is not smoothed its bumpy and has drips and globs here and there some Im sure it made it...
  9. B

    1980 chrysler tri hull with 1986 Johnson outboard

    Hello everybody! I am new to this forum and also new to boat restoration. I am a carpenter by trade so I am hoping that my skills can be honed towards fixing up this boat. This is my second boat, the first being a 15' flat bottom aluminum jon boat with a 7hp outboard. I purchased this boat a...
Top