Search results

  1. nola mike

    Can't sync my 2003 25 hp 2 stroke...

    I would as well, hence the post. And yet I think I've done everything correctly.
  2. nola mike

    95 182 br crownline 4.3 mercruiser

    Scott's questions would help. Start with how old is the fuel
  3. nola mike

    Tinkering on the 4.3l this winter...

    Didn't realize you were using an AFR. I tuned mine with a vacuum gauge and AFR which was cool. My AFR rose a bit as well and I think I had the springs kick in around 3500 rpm. AFR was right around 14, but dropped to like 10 when secondaries open. I think I can get some hp if I rejet but #542 on...
  4. nola mike

    Leak through transom

    That looks like a PVC insert? Don't like the looks of that screw hole. Id still drill it inside around the hole.
  5. nola mike

    Tinkering on the 4.3l this winter...

    I guess maybe more efficient air flow through the smaller ports? Your numbers are about where mine are at using a 21p turning point 4 blade. I hit 46-48 mph @ 4600 rpm. I don't get much except for a cool sound when the secondaries open. I'm rich when the secondaries open but haven't felt like...
  6. nola mike

    Artificial Intelligence

    Interesting. I thought Google still accepted it in some form (quotes, +, -, etc). Gotta be some engine where that's possible. I know that Facebook makes it freaking impossible (actually, it is possible if you manually modify the URL)
  7. nola mike

    Artificial Intelligence

    My wife on our first date told me she knew that I was in school and knew what type of car I drove because she looked me up on Google (before it was a verb). I said "WTF is Google?" "It's a search engine, you know like askjeeves or Altavista"
  8. nola mike

    Can't sync my 2003 25 hp 2 stroke...

    No, that's the issue. Per the manual the cable is adjusted at WOT. If that's the case then there isn't any preload at idle. If adjusted for idle preload there isn't enough travel to reach WOT
  9. nola mike

    Can't sync my 2003 25 hp 2 stroke...

    They used electronic and then changed to mechanical (strange). Very simple advance mechanism. I actually took C/D off and regreased. Throttle return spring is good. Nothing is binding, there's just nothing bringing C/D aft except for the throttle cable.
  10. nola mike

    Can't sync my 2003 25 hp 2 stroke...

    I've NEVER had this thing adjusted correctly, have owned it for 12ish years. Came to me with everything out of spec. Every once in a while I try to adjust it correctly and fail. Another attempt the last few days. It's a remote shift, and the procedure is a bit different than the side/tiller...
  11. nola mike

    1997 5.7L thunderbolt ignition. Slow crank

    1. Ignore the plugs, they aren't the problem 2. Pulling the outdrive is waaay easier than swapping the starter. Didn't see whether its a bravo or alpha, but still... 3. Didn't see how hard it is to turn by hand yet 4. Plugs out there should be very little load on that starter. 9.1v is low...
  12. nola mike

    1997 5.7L thunderbolt ignition. Slow crank

    Yes, good call, don't turn it like that. That bolt can snap. That said without plugs it shouldn't take much force (assuming you're in neutral). A few different ways to turn it, either by turning one of the accessory (alt, ps) pulleys, using a special tool, put a couple of bolts in the balancer...
  13. nola mike

    1997 5.7L thunderbolt ignition. Slow crank

    does it spin easily by hand?
  14. nola mike

    Do it yourself Pumpout?

    $600 here
  15. nola mike

    Battery switch only for motor circuit?

    Not the ignition though
  16. nola mike

    Leak through transom

    Tap test is garbage. IMO drilling is the only way to check. Even fancy moisture meters in capable hands are subject to interpretation. Plug housing being loose in the transom caused by/causing surrounding rot is by far your most likely/serious problem at this point. Pull the housing and you'll...
  17. nola mike

    Need help with steering cable.

    Picture?
  18. nola mike

    4.3 Mercrusier carb questions

    You could help us by letting us know which carb you have, but both the mercarb 2bbls and the weber 4 bbls are easy enough to rebuild.
  19. nola mike

    Best way to fasten bow rails?

    Actually gives me hope that the screws can actually do a decent job. Embarrassed to say that the plan for the bow is now new screw holes-->4200-->send it until it breaks again.
  20. nola mike

    Best way to fasten bow rails?

    Yeah, looked just like salt corrosion/finish bubbling. 4 new SS cleats incoming...
Top