Search results

  1. B

    Weight difference between Steel and Aluminum Trailer?

    Looking at two boats very similar in size and weight. One has an Aluminum trailer and one has a Steel trailer under it. Both are tandem axle. I uncovered the apparent fact that the Aluminum trailer weights about 1000 lbs less that the steel version of the same. I am concerned because the 1K...
  2. B

    Increasing Half Ton`s Towing Capabilities ?

    I currently tow with a `05 Silverado 1500 Crew Cab 4wd with the 5.3 engine. I believe it has a tow rating of 7500lbs. I am considering purchasing a new boat that with the trailer come in around 6300lbs. I am wondering what reasonably can be done to this truck to make it a stronger tow vehicle, I...
  3. B

    Sx to dps ratio`s

    I am contemplating a swap out of my `02 VP SX-M to a DPS lower unit. My current sx-m gear ratio is a 1.60. What DPS gear ratio should I look for to be a close equivilant. Thanks.
  4. B

    SX-M TO DPS, Is it possible, whats the cost

    Would love to swap out my SX-M outdrive for a DPS outdrive. First of all is it possible, secondly how difficult is the change over to do, and thirdly what would be the net cost in doing so, assuming I could sell my SX-M to offset the cost. Anybody done it?
  5. B

    Sliding Tongue Grease

    I am in the process of re-conditioning my trailer surge brake slider, replacing the shock dampner and cleaning out the old grease. Is there a better grease than another to reinstall in the cleaned up unit. Should I use regular wheel grease or white lithium grease, is one better than another?
  6. B

    VP Kill switch with lanyard part#

    Feeling the need to purchase a back up kill switch lanyard for my VP engine and control. The coloration on my current one looks brittle and I can see a prong breaking off soon. Anybody out there know a VP part number to search or know of a place where I can buy an aftermarket, if made. Its for...
  7. B

    Alternator guage readings

    I`ve noticed that my Charge indicator on my dash seldom gets much above 12volts, especially at lower speeds on my VP 5.0 l. The origional alternator was re-built a couple years ago. My batteries are newer, less than two years old and I keep them fully charged before going out each week. Is this...
  8. B

    Alternator hook up.

    Does anybody know where I can view a wiring diagram of the backside of an alternator showing which studs the wires are nutted to. I took mine off my 5.0gxib engine to have it rebuilt and I want to make sure that I get it wired back properly. It is the origional to my engine, not sure of...
  9. B

    Underheating 5.0 gxib

    Hey guys, I am continuing to chase an Underheating problem with my VP 5.0 gxi-b engine. Ever since I accquired this boat my boat never seems to get up to the 160 normal operating temp. My guage seems to stay in the 120-130 area, no matter how long or how hard the engine is ran. In fact the...
  10. B

    Correct Part # for water temp sending unit.

    Hey guys, need help finding a correct part number. I have a 2002 5.0 gxi-b engine. I am looking to replace my water temp sending unit that screws into the thermostat housing. I am getting some funny readings on my dash guage and figured this would be a good place to start. My search so far has...
  11. B

    Upgrade to Class IV hitch?

    It just hit me that my trucks (`05 Silverado 1500 with tow package) hitch may not be rated for the boat that I pull. Been towing my boat, about 6-6,500 lbs including trailer for the last 3 years, without any problems , with the factory Class III, 5k rated, hitch that came with the truck. So far...
  12. B

    Exaust Manifold Temperature Differences

    I fired my motor up this weekend for the first time this spring. Its a 5.0 gxi-b. After running for about 10 minutes on the muffs, making sure the water pump was working after being replaced, I decided to take some temp readings at various locations on the engine with a laser temp gauge. I...
  13. B

    Weight rating for swing tongue?

    Is there a weight rating on a bolt on or weld on trailer swing tongue assembly? I have been contemplating adding a swing tongue assembly to my trailer tongue to save storage space but was wondering if there was a weight rating on them. I have not seen one stated . My boat and trailer weigh...
  14. B

    Winterizing without adding new oil until Spring?

    Is it harmful to your engine to put your boat(and engine) in storage for the winter without adding new engine oil? With all other winterization steps done, old oil pumped out, antifreeze added and pump impeller removed, is it OK to wait until spring before adding the new engine oil at that time...
  15. B

    SX Trim Guage Adjustment

    The trim guage position indicator on the boat does not coinside with the true position of the lower unit on my SX-M drive. When unit is fully down the guage only reads 3/4 down. How difficult is this to correct, can it be done without alot of special tools?
  16. B

    Trim Motor Bracket Replacement

    Hey guys, need some help. The power trim pump bracket for my 5.0 gxib engine, sx-m outdrive has rusted through on the bottom, where it attaches to the inside hull within the bilge area. I have scoured the internet trying to find a part number but can`t find anything. Anybody got any suggestions...
  17. B

    Gelcoat questions

    I have a few scratches/gouges to repair on my boat. What is the best type of gelcoat to work with. My experience in the past with these repairs is that the gelcoat was difficult to work with because it was too runny and drippy. Do they make a gel coat that is a little more putty like that can be...
  18. B

    Whats the best way to remove old letters?

    I just purchased a new set of lettering for my Chaparral, both sides. What is the best way to remove the old letters from the boat without doing any damage to the boat and little damage to the letters? They are raised chrome plastic stuck on with two sided tape. Will a heat gun and scraper be ok...
  19. B

    Water Temp Sending Unit

    I need to know if anybody knows where I can find the part number for the water temp sending unit for a 5.0GXi-b motor . I also need the website of a vendor for such a part. I`ve got temp issues and am considering replacing everything until I find the casue. Thanks.
  20. B

    Volvo Prop Lock Suggestions

    Thinking about adding a Prop locking device to protect my stainless prop on my SX drive `02 volvo. Any suggestions about a good brand that will fit this style of unit?
Top