Search results

  1. S

    1988 Johnson 70hp inspection

    I'm with Tim on this otherwise I would just hone bore the two and take my chances.
  2. S

    Impeller kit

    And if you need any individual pieces for the gearcase and water pump assembly, you can find it here. https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1961&hp=40&model=35525&manufacturer=Evinrude&section=GEARCASE
  3. S

    Impeller kit

    Open this link, scroll down to 40 HP and under 1960 to 1970 you will see a Sierra part number. Click on that and the Sierra impeller and the Evinrude impeller will pop up. https://www.marineengine.com/parts/sierra-marine/quick-list/johnson-evinrude-sierra-impeller-water-pump.html Cheers
  4. S

    1989 Johnson power tilt/trim

    Since it's apart, why not.
  5. S

    1994 140hp evinrude

    👍
  6. S

    1994 140hp evinrude

    95 to 140... Could be your compression tester. I have 3...they all read differently. Check it right after you've earned it up.
  7. S

    1994 140hp evinrude

    S So 3/8 gap on all cylinders? Good blue spark? Compression states well used. Take it out for a spin.
  8. S

    ‘77 Johnson 70hp Starter Troubleshooting

    Test and make sure starter power is coming out of the solenoid when the "click" sounds.
  9. S

    1989 Johnson power tilt/trim

    Get the rebuild kit and watch one of the many videos online. "If picture worth a thousand words, video worth a million."
  10. S

    1994 140hp evinrude

  11. S

    1994 140hp evinrude

    Spark means nothing....buy an inexpensive spark gap tester like Racerone suggested...cheap at any auto parts store. Could be an ignition coil.
  12. S

    1994 140hp evinrude

    I'm guessing you lost one cylinder somehow.....spark, fuel, compression....something. what story do the spark plugs tell?
  13. S

    ‘77 Johnson 70hp Starter Troubleshooting

    Quite a bit of bad luck your having, might want to NOT go rock climbing.
  14. S

    VRO Pump Question

    Perfect answer. Many videos on it and always buy the best quality parts that are out there....usually OEM.
  15. S

    No spark until end of cranking

    Yeah, your pack is bad then
  16. S

    ‘77 Johnson 70hp Starter Troubleshooting

    Something is wonky. Take the ground off the s and ground the body of the solenoid.
  17. S

    ‘77 Johnson 70hp Starter Troubleshooting

    Show a picture of how you wired it
  18. S

    ‘77 Johnson 70hp Starter Troubleshooting

    Well, this is an 1987 70 hp rude...it's mounted closer to the starter. I'd make sure you have adequate clearance.
  19. S

    ‘77 Johnson 70hp Starter Troubleshooting

    Another possible issue is your starter wire looks awfully close to contacting a ground. Check clearances. Might have been a blessing in disguise that you wired the solenoid wrong...in fact I think maybe the solenoid is in its mount wrong. I have a 70 so I'll go check.
  20. S

    ‘77 Johnson 70hp Starter Troubleshooting

    I found your problem. Evinrude doesn't use the I and the S on there's. The I stands for ignition and the S for start. The S in this case means Start, but by completing the ground. You have it wired in reverse. The hot signal wire goes to the top mini nut or what should be the I...and the...
Top