Worst of two evils 3.7

[achris]

Re: Worst of two evils 3.7

ok... Here's an alternative. It's a bit more complicated, but might be your only way round...

Load the photo to a photo sharing site, like photobucket. Normally when you load a picture on those sites they have a few little boxes that allow you to easily copy the picture location to the 'clipboard'. Take that copied link and paste it straight onto the iBoats post....

Should work.

Chris.....

 

[clydey]

Re: Worst of two evils 3.7

FYI to those interested. The osc 0879 riser is correct and only $169.With gasket and shipping $200. pretty go deal.Waiting for gaskets to put it all back together.I am praying this will end the oil in the antifreeze and milky oil in the pan.Totally flushed out exchanger and pump with fresh water.

 

[clydey]

Re: Worst of two evils 3.7

Question on gaskets???I di know you don't use any sealantt on the head gasket but what about the others...intake/,exhaust?, or riser.

 

[achris]

Re: Worst of two evils 3.7

No sealer on any of those gaskets either. Just make sure the gasket surfaces are clean and flat. And tighten the bolts/screws up to the correct tension.

 

[clydey]

Re: Worst of two evils 3.7

Update..Changed out head gasket,exhaust gasket and intake gasket.Also new riser (old one had a big rust hole inside allowing antifreeze in)and started up.Purrrred like a kitten.Let's see what happens next.Crossing fingers lol