Wiring Diagram 2001 Crownline 266 BR

[xXTECHxMANXx]

Looking to see if anyone would have a wiring diagram for a 2001 Crownline 266 BR with a MX 6.2 MPI BIII tring to track down a fuel pump wiring issue.

 

[alldodge]

Welcome
Moving you to Merc section do to fuel pump problem

What is the issue?

 

[tpenfield]

Use the engine’s wiring diagram. the boat specific wiring is often not published

 

[xXTECHxMANXx]

I cant seem to find any wiring diagrams im trying to track down the fuel pump circuit to see what is causing it not to turn on

 

[alldodge]

I cant seem to find any wiring diagrams im trying to track down the fuel pump circuit to see what is causing it not to turn on

Got that on the first post, but without knowing what "motor" your working on we cannot help

I'm pretty sure its not a Briggs and Stratton but other then that I have no clue. Might be a Merc, VP, Ilmor, carb, efi, mpi

 

[xXTECHxMANXx]

Got that on the first post, but without knowing what "motor" your working on we cannot help

I'm pretty sure its not a Briggs and Stratton but other then that I have no clue. Might be a Merc, VP, Ilmor, carb, efi, mpi

It's a 6.2 mx is what the first post said that's what it says on the warranty registration

 

[jbcurt00]

Service manual is listed:

Mercury Marine - A Worldwide Leader in Marine Propulsion | Mercury Marine

Manufacturers of outboard motors and MerCruiser inboard engines, with over 4000 dealers in the United States.

www.mercurymarine.com

Has wiring diagrams for motor

 

[alldodge]

It's a 6.2 mx is what the first post said that's what it says on the warranty registration

Sorry, I mixed yours up with another
Don't know if it has a MEFI, 555 ECM or PCM but... if I had a serial number ...

The fuel pump is turned ON/OFF by the ECM applying a ground to one side of the relay coil. Trun key ON, energizes Main Power Relay (MPR) should hear a beep then fuel pump turns ON.

If it's not turning ON then check fuses, MPR relay, FP relay and then wire from ECM

Her is 555

 

[tpenfield]

2001 vintage 6.2 would probably be either MEFI-3 or the ECM. The service manual for the engine is what's needed and it will have the wiring diagrams.

To clarify for the OP . . . Engine wiring is not boat brand specific, they all use the same wiring based on the motor.