gbarbosa1982
Cadet
- Joined
- Oct 18, 2015
- Messages
- 14
Have a 2002 Mercury 125hp, 2 stroke.
I have read several forums and have done it all, but flywheel continues to run slow.
facts:
- replaced the starter (brand new)
- runs at OK-speed without spark plugs
- Easy to turn the flywheel with hands without the spark plugs.
- tested the solenoid - ok
- brand new battery (multimeter shows 12.7v, so it was charged)
- I used jumper cable to direct connect to the starter and still runs slow.
- used the pull cord and really think it is hard to turn.
What am I missing? Why it runs slow (hard to turn)?
Thank you for your help.
I have read several forums and have done it all, but flywheel continues to run slow.
facts:
- replaced the starter (brand new)
- runs at OK-speed without spark plugs
- Easy to turn the flywheel with hands without the spark plugs.
- tested the solenoid - ok
- brand new battery (multimeter shows 12.7v, so it was charged)
- I used jumper cable to direct connect to the starter and still runs slow.
- used the pull cord and really think it is hard to turn.
What am I missing? Why it runs slow (hard to turn)?
Thank you for your help.