wil not shift in to reverse

papasage

Senior Chief Petty Officer
Joined
Jan 12, 2003
Messages
785
1998 40 Hp Evinrude shift rod length . 21.38 was what i found but it will not go into reverse .
 

papasage

Senior Chief Petty Officer
Joined
Jan 12, 2003
Messages
785
everything on 40 Hp. 1998 Evinrude shows' that
 

Attachments

  • 52475 gear case 1998.gif
    52475 gear case 1998.gif
    118.5 KB · Views: 2

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
36,459
I know what the parts look like.-----Where does it show the 21.38" for your motor?----Model # of your motor ?
 
Last edited:

papasage

Senior Chief Petty Officer
Joined
Jan 12, 2003
Messages
785
i will set it at that and see what it does later when it cools down . hot out side where i am at .
Thanks from So. Ga.
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
36,459
Post #5----Click on that.----Then see ---tech articles-----Click and look on page 55 I think.
 

papasage

Senior Chief Petty Officer
Joined
Jan 12, 2003
Messages
785
21 15/16 it is going into both F and R. Thanks for the information .
my tag has 1997 but when i ran the serial # it came up a 1998.
 

Attachments

  • papasage boat.jpg
    papasage boat.jpg
    92.6 KB · Views: 1
Top