Which gasket to use? 74' Johnson 50hp

[Chrisravosa36]

Hi, i ordered the OMC Powerhead Kit for the 1974 johnson 50hp, It came with two gaskets for the reeds, which one should I use? The gasket kit didn't come with any instructions or tips. In the manual it shows the thick one without the hole in the middle for it, just wanted to double check that..

 

[flyingscott]

Which one came off of it

 

[Keyboardman]

The one with the hole in the center is the one I got when I replaced mine after checking the reed valves.

 

[Chrisravosa36]

Which one came off of it

Im not sure, It came off in many peice, the last owner used sealer on them....

 

[Chrisravosa36]

The one with the hole in the center is the one I got when I replaced mine after checking the reed valves.

Ok, I will use that one, thanks! Also do you know anything about the american bosch models and the presolite models?

 

[Keyboardman]

If you're talking about Starters I haven't had to mess with mine at all. Not yet,,,,,,,

 

[Keyboardman]

I used a non hardening sealer on the intake gasket when re installing the intake manifold.