What size motor to get for my boat?

J

jitterbug127

Chief Petty Officer
Joined
Feb 6, 2023
Messages
601
I am back to the drawing board finding a motor for my boat. I own a 1980 smoker craft 16x54. I have no clue what model it is or what the max horsepower recommendation is. I’ve looked around online and I haven’t even found a boat that matched the specs for my boat. Wondering if anyone had recommendations for Hp to put on my boat? I’ve had a 6 hp and 15 hp. Really didn’t notice tons of difference in the two.
 
J

jitterbug127

Chief Petty Officer
Joined
Feb 6, 2023
Messages
601
jimmbo said:
I will assume 16' length and 54", Beam or Transom width?

What kind of Boat? Utility, Pram, Runabout, Canoe?
Click to expand...
I should’ve been more specific I do apologize.

My boat is a 16 foot Jon boat. The base of the transom is 54” wide and the beam of the boat is 70”. I will need a long shaft/tiller set up.
 
jimmbo

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
13,446
Does the Hull have a HIN? On a Tin Boat, it is usually on a metal strip rivieted to the Starboard side of the Transom. Last 2 digits reveal the Yr
 
J

jitterbug127

Chief Petty Officer
Joined
Feb 6, 2023
Messages
601
jimmbo said:
Does the Hull have a HIN? On a Tin Boat, it is usually on a metal strip rivieted to the Starboard side of the Transom. Last 2 digits reveal the Yr
Click to expand...
It does. Boat is a 1980. I found that by looking up the hull #. I also looked up the specs on Google and I didn’t find a boat that matched my specs to boat.
 
dwco5051

dwco5051

Commander
Joined
Sep 14, 2008
Messages
2,408
oldboat1 said:
Should hold a 35 -- don't think I would mess with switching carbs if the 25 runs well.
Click to expand...
I will guess 40 would be the max as I had friends with jon boats that size. You will find the 25 will be more than adequate. Many packages were sold with the economy version having the 25 and the option of a 35 or 40 depending on the brand.
 
You must log in or register to reply here.
Top