What is this?

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,572
1996-2000 5.7 liter

10243880...350...95-00...2 or 4...Vortec truck, Gen.I crate motors and "ZZ4", roller cam, one piece rear seal
 

kenny nunez

Captain
Joined
Jun 20, 2017
Messages
3,290
Definitely a MPI model engine that was connected to a stern drive. Probably in the 430 HP range. Looks like the model of engine that was in the Donzi I had.
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
9,048
Is there a aluminum type tag just above the engine starter?
Clean the casing of the EFI's "ECM" as there should be some stickers on it that should tell a bit more about the engine designation model it would have been/fit which looks to be an Alpha stern drive and possibly engine year which that model should have started in either late 2002 /early 03.


1670294328158.png
 
Joined
Feb 26, 2012
Messages
73
Is there a aluminum type tag just above the engine starter?
Clean the casing of the EFI's "ECM" as there should be some stickers on it that should tell a bit more about the engine designation model it would have been/fit which looks to be an Alpha stern drive and possibly engine year which that model should have started in either late 2002 /early 03.


View attachment 373385
I will look for this after work. Thank you.
 

QBhoy

Fleet Admiral
Joined
Mar 10, 2016
Messages
8,342
Mpi 350 is where my money is. 2002 onwards with the quick drain system shown there.
 

Scott06

Admiral
Joined
Apr 20, 2014
Messages
6,440
Mpi 350 is where my money is. 2002 onwards with the quick drain system shown there.
Agreed - 300 hp and looks like it is for an alpha not a bravo as there is no belt driven seawater pump
 

QBhoy

Fleet Admiral
Joined
Mar 10, 2016
Messages
8,342
What’s going on in that last picture there ? Is that putty showing there ?
 

tank1949

Lieutenant Commander
Joined
Apr 4, 2013
Messages
1,893
Nice! Thank you!
fine motor but why was moved from boat or maybe removed from truck in lieu of putting into boat. Run compression and oil checks to be sure. Keep in mind if your boat is carbureted, it is more laborious installing an EFI
 
Top